502z
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 6
|
Well, after deep consideration I decided to ask a very stupid question. This is in response to my previous post where the bike cuts out near full throttle. Apparently, I did not look too close to the positions on the valve. On previous bikes the normal position was with the arm down at 6 o'clock. At a closer look on the Savage, "Pri" is at 3 o'clock. I presume "pri" means primary??? It is a little confusing with "on" at 6 o'clock. Will someone confirm the arm needs to be at 3 o'clock "pri"....
|