T Mack 1 - FSO
Serious Thumper Alliance Member
Offline
sold 2001 LS650 for a 1986 XLH1100
Posts: 2919
Emmaus,Pa
Gender:
|
If you haven't modified the carb yet, buy the Jet kit Lancer sells in the Market place. He has the best prices.
If the Dyna muffler is a "stock" take off, then you will need at least a 150 Main, maybe the 152.5. With the 150, you will need to adjust the needle spacer (white spacer). With the 152.5, you would need to run it for a bit and check the plug to see if having the bigger main will give you enough mid-range on the needle to keep the white spacer. It's right at the edge, so climate & altitude will play a factor in your needs. You might need to have just a little off. I suggest use washers so you can "go -back", and make sure the washers fit in the little hole in the inside of the slide. The first set I used didn't and I was be-fuddled why I was so rich.....
If it's a Screaming Eagle Dyna, then you'll probably need the 152.5 main, and the 55 pilot jet, and will need to play with the white spacer.
|