gregp
YaBB Newbies
Offline
I love YaBB 1G - SP1!
Posts: 5
|
Thank you for your suggestions. The floor boards were on the bike when I bought it. It appears that the original owner removed the OEM rubber, leaving the mounting bar. Then he drilled through the floorboard and bar and mounted with a bolt or screw.
I tried replacing the foot rests with an aftermarket set from J&P cycles, but the hole in the mounting bar was too small, and it didn't have the lip on the end that lets the bar swing up or fold up, but keeps it from folding all the way down when your foot is on the peg.
When I was in the Army, we would use a "can point" to pull parts that never seemed to come in when ordered (probably different now-a-days in the high tech Army). Anyway, do u-pull-it yards keep bikes for this kind of stuff?
Thanks again
|