SuzukiSavage.com - Horsepower

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: Horsepower Reply #15 - 11/10/07 at 12:32:18 Another note: so obviously the HP will be at the same rpms...
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: Horsepower Reply #16 - 11/10/07 at 15:02:28 Quote: I don't think the engine will ever reach its full potential until it can pull all the way up to redline. Hey, a little more cam will take care of that.
Back to top	IP Logged

vtail

Senior Member

Offline

life's short, ride
fast

Posts: 408
Portland,OR
Gender: male

Re: Horsepower
Reply #17 - 11/10/07 at 16:52:55

A cam might. Mine now just about pulls red line in 5th with stock gearing with the below mods. Love it, but at those RPM it's gonna have limited life since mean average piston speeds reach 4000 ft/min. That's average, hate to think how fast that slug is going at mid-cylinder. (It's fastest speed). Anyway I think if you keep it under 80mph it should have a good life. Cheesy

Back to top

'07, White spacer REMOVED, 152,5 main jet, K&N drop-in filter, Mac exh, Sigma 906, ENM PT15B2 tach, factory s bags, shield, backrest/lug rack, crashbar, Kuryakyn 7980 ext hwy pegs,412-4233C+'09 C50T

IP Logged

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: Horsepower
Reply #18 - 11/11/07 at 07:20:58

vtail wrote on 12/31/69 at 16:00:11:

A cam might. Mine now just about pulls red line in 5th with stock gearing with the below mods. Love it, but at those RPM it's gonna have limited life since mean average piston speeds reach 4000 ft/min. That's average, hate to think how fast that slug is going at mid-cylinder. (It's fastest speed). Anyway I think if you keep it under 80mph it should have a good life. Cheesy

I'd never thought about "mid cylinder" speed, or the crankshaft position that is halfway between TDC and BDC before. Hmmm Tongue

Back to top

IP Logged

gsJack YaBB Newbies Offline Posts: 5 NE Ohio Gender:	Re: Horsepower Reply #19 - 11/11/07 at 08:32:45 From a CW comparo: http://smg.photobucket.com/albums/v443/jcp8832/CWDealsOnWheels/?action=view¤t...
Back to top	IP Logged