SuzukiSavage.com - HELP ! Removing Front DRIVE PULLEY Nut

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › HELP ! Removing Front DRIVE PULLEY Nut

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Send Topic

Print

HELP ! Removing Front DRIVE PULLEY Nut (Read 100 times)

strangeling Senior Member Offline Ex Savage Rider but always a SAVAGE Posts: 427 Salt Lake City UTAH Gender:	HELP ! Removing Front DRIVE PULLEY Nut 11/05/07 at 14:14:39 Ok, so I have everything to do my chain conversion but I cannot get the front drive Pulley nut loose to remove it ! Any help would be appreciated !!!!!!!!!
Back to top	07 S40 Brat BOBBER - Hard Krome drag pipe, header wrap, Cone filter, jetted , harley drag bars, solo seat, chain conversion, seeger forward controls, custom rear fender, fork gaiters. IP Logged

Hell, Billy Full Member Offline back in black, again Posts: 176 a dirt road, somewhere in R I	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #1 - 11/05/07 at 14:16:35 I think it turns the other way---as in righty loosey, but you`d best check the manual. B
Back to top	IP Logged

strangeling Senior Member Offline Ex Savage Rider but always a SAVAGE Posts: 427 Salt Lake City UTAH Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #2 - 11/05/07 at 14:22:12 Thanks but the Clymers doesn't tell me anything about the thread direction ?
Back to top	07 S40 Brat BOBBER - Hard Krome drag pipe, header wrap, Cone filter, jetted , harley drag bars, solo seat, chain conversion, seeger forward controls, custom rear fender, fork gaiters. IP Logged

Gary On A Savage Serious Thumper Alliance Member Offline Only 15 mins riding could save you $$$ in Dr bills Posts: 941 Fresno, California Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #3 - 11/05/07 at 14:33:21 I think it is a lefty-loosey. Follow the Clymer's manual. Make sure you are doing this before you pull the rear wheel and belt. Also, the rear wheel needs to be on the ground for traction.
Back to top	'95 Savage with the lowered, full fender look '96 Honda Shadow 1100 ACE My Riding Blog: http://garyonasavage.blogspot.com/ IP Logged

Gary On A Savage Serious Thumper Alliance Member Offline Only 15 mins riding could save you $$$ in Dr bills Posts: 941 Fresno, California Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #4 - 11/05/07 at 14:35:41 Better yet...read hutch's directions: http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1174239333
Back to top	'95 Savage with the lowered, full fender look '96 Honda Shadow 1100 ACE My Riding Blog: http://garyonasavage.blogspot.com/ IP Logged

strangeling Senior Member Offline Ex Savage Rider but always a SAVAGE Posts: 427 Salt Lake City UTAH Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #5 - 11/05/07 at 14:42:08 Cool, But I still can't get it to budge ! Any suggestions ?
Back to top	07 S40 Brat BOBBER - Hard Krome drag pipe, header wrap, Cone filter, jetted , harley drag bars, solo seat, chain conversion, seeger forward controls, custom rear fender, fork gaiters. IP Logged

Gary On A Savage Serious Thumper Alliance Member Offline Only 15 mins riding could save you $$$ in Dr bills Posts: 941 Fresno, California Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #6 - 11/05/07 at 14:49:48 I used a long torque wrench to loosen. You might get some help, someone to sit on the bike while you loosen. Mine was stiff but came loose fairly easy.
Back to top	'95 Savage with the lowered, full fender look '96 Honda Shadow 1100 ACE My Riding Blog: http://garyonasavage.blogspot.com/ IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #7 - 11/05/07 at 14:50:05 Will the belt guard still work with the chain.
Back to top	william h krumpen IP Logged

Gary On A Savage Serious Thumper Alliance Member Offline Only 15 mins riding could save you $$$ in Dr bills Posts: 941 Fresno, California Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #8 - 11/05/07 at 14:54:44 bill67 wrote on 12/31/69 at 16:00:11: Will the belt guard still work with the chain. Depends on your sprockets and chain type. Mine "touches" the tab every now and then when I get on the gas.
Back to top	'95 Savage with the lowered, full fender look '96 Honda Shadow 1100 ACE My Riding Blog: http://garyonasavage.blogspot.com/ IP Logged

strangeling Senior Member Offline Ex Savage Rider but always a SAVAGE Posts: 427 Salt Lake City UTAH Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #9 - 11/05/07 at 15:15:11 Gary, I'm also using a long torque wrench. Maybe I'll just call it a day and try again tomorrow, I'm really frustrated right now, it seems some stupid little nut or screw always slows me down. ARRRGGGHHH ??? :'(
Back to top	07 S40 Brat BOBBER - Hard Krome drag pipe, header wrap, Cone filter, jetted , harley drag bars, solo seat, chain conversion, seeger forward controls, custom rear fender, fork gaiters. IP Logged

jk Ex Member	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #10 - 11/05/07 at 15:44:37 strangeling wrote on 12/31/69 at 16:00:11: Cool, But I still can't get it to budge ! Any suggestions ? 38 inches... The nut sees that coming and will spin off on it's own (Actually, I only needed that to get the drive gear/old cam chain off)
Back to top	IP Logged

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #11 - 11/05/07 at 18:19:15 Did you pound down the nut tab? It holds the nut in place and keeps it from spinning...
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

strangeling Senior Member Offline Ex Savage Rider but always a SAVAGE Posts: 427 Salt Lake City UTAH Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #12 - 11/05/07 at 18:23:30 Yeah I flattened out the washer tab, but I'll check again tomorrow in case there is some part still not flattened out enough. Thanks
Back to top	07 S40 Brat BOBBER - Hard Krome drag pipe, header wrap, Cone filter, jetted , harley drag bars, solo seat, chain conversion, seeger forward controls, custom rear fender, fork gaiters. IP Logged

Hell, Billy Full Member Offline back in black, again Posts: 176 a dirt road, somewhere in R I	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #13 - 11/05/07 at 20:09:59 Hey, I stand corrected, apologies, my bad. Bill
Back to top	IP Logged

Gary On A Savage Serious Thumper Alliance Member Offline Only 15 mins riding could save you $$$ in Dr bills Posts: 941 Fresno, California Gender:	Re: HELP ! Removing Front DRIVE PULLEY Nut Reply #14 - 11/05/07 at 20:54:07 Maybe try some liquid wrench or something and let it sit to loosen it. (I guess it's ok to use here?) Probably has a ton of locktite on it or something.
Back to top	'95 Savage with the lowered, full fender look '96 Honda Shadow 1100 ACE My Riding Blog: http://garyonasavage.blogspot.com/ IP Logged

Pages: 1 2

Send Topic

Print

‹ Previous topic | Next topic ›

« Home