Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Boulevard Emission Cannister Thing?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Boulevard Emission Cannister Thing? (Read 10 times)
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Boulevard Emission Cannister Thing?
10/13/07 at 23:38:34
I noticed that Vtail's '07 Boulevard has an unused mount under the battery. They have modified the old muffler bracket (as I know it) and it appears to be standard issue on non CA models now. (OR and WA don't have the cannister)
This bracket has what appears to be 4 bolt holes in it.
I know that CA models have the cannister mounted there, but I've never seen one up close. So, I assume that Suzuki is just fitting all bikes with the same muffler bracket to simplify things....or thinking to the future of the EPA
Anyway, is this the way all Boulevards are equipped now?
And finally, has anyone ever thought about mounting the battery on it (if it's unused)? Looks to be about the right size, and I've been wondering where mine is going to go next anyway
Back to top
IP Logged
noshow
YaBB Newbies
Offline
Posts: 23
Re: Boulevard Emission Cannister Thing?
Reply #1 -
10/14/07 at 19:31:58
Greg,
I haven't looked more than just a glance.....but I noticed the bracket in which you are referring to.
When I was taking off my exhaust I had wondered what it was for........I'll look again and see if the battery can be moved there.
I'll let you know tomorrow when I look at it closer.
Back to top
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #2 -
10/15/07 at 08:53:13
noshow wrote
on 12/31/69 at 16:00:10:
Greg,
I haven't looked more than just a glance.....but I noticed the bracket in which you are referring to.
When I was taking off my exhaust I had wondered what it was for........I'll look again and see if the battery can be moved there.
I'll let you know tomorrow when I look at it closer.
Great. My older Savage bracket looked (used to) very similar but it didn't have the bolt holes. The Savage40 bracket even looks sturdier. And of course, mine was purchased in NC anyway.
Looks like this now
I sure would consider buying a Savage40 bracket if a battery would fit on it...
Back to top
IP Logged
T Mack 1 - FSO
Serious Thumper
Alliance Member
Offline
sold 2001 LS650 for
a 1986 XLH1100
Posts: 2919
Emmaus,Pa
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #3 -
10/15/07 at 10:01:04
Greg,
Is that pict your bracket?
My '01 (PA bike all it's life) is different in two ways. Has what sounds like your describing, could put a battery there, althought I think it's more under the air box. Second, I have two holes to bolt the stock muffler on. Is your's cut off?.
Back to top
Engineers design things, Technicians make them work.
---
30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck
IP Logged
SpeedyG
YaBB Newbies
Offline
I love YaBB 1G -
SP1!
Posts: 36
Virginia
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #4 -
10/15/07 at 13:08:06
Hi Greg,
Your post got me curious about mine, so I took a look. My '07 has the bracket with the 4 holes in it.
Colleen in VA
Back to top
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #5 -
10/15/07 at 22:27:50
T Mack 1 - FSO wrote
on 12/31/69 at 16:00:10:
Greg,
Is that pict your bracket?
My '01 (PA bike all it's life) is different in two ways. Has what sounds like your describing, could put a battery there, althought I think it's more under the air box. Second, I have two holes to bolt the stock muffler on. Is your's cut off?.
Yes. Mine is modified for a single bolt to mount a Raask, and I added some decorative holes after I cut off the other side of it... stock but not stock, as they say.
Back to top
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #6 -
10/15/07 at 22:34:12
SpeedyG wrote
on 12/31/69 at 16:00:10:
Hi Greg,
Your post got me curious about mine, so I took a look. My '07 has the bracket with the 4 holes in it.
Colleen in VA
Okay from Virginia. Is the piece with 4 holes just flat metal or is it sorta stamped out?
This is from the CD. Shows the bracket from the rear wheel view on my spouse's bike, which is a non-California Savage. It's that handy place that sometimes gets used for jacking the bike
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Boulevard Emission Cannister Thing?
Reply #7 -
10/15/07 at 23:26:02
Maybe laying a board upo there to keep the jack from jamming on such a small area would spread the load out & not bend the jacket( Jack Bracket)
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #8 -
10/16/07 at 08:29:56
Dunno. That bracket is probably the first and most convenient place to jack the bike, but not really a good idea.
I didn't realize it when I took that shot, but the jack really is under the engine that time.
Either way, my ultimate goal is to get rid of that big old battery box if possible...hiding the battery would be even better.
Back to top
IP Logged
SpeedyG
YaBB Newbies
Offline
I love YaBB 1G -
SP1!
Posts: 36
Virginia
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #9 -
10/17/07 at 04:06:36
Savage_Greg wrote
on 12/31/69 at 16:00:10:
Okay from Virginia. Is the piece with 4 holes just flat metal or is it sorta stamped out?
This is from the CD. Shows the bracket from the rear wheel view on my spouse's bike, which is a non-California Savage. It's that handy place that sometimes gets used for jacking the bike
http://i21.photobucket.com/albums/b277/gmdinusa/Muffler_2.jpg
Back to top
IP Logged
SpeedyG
YaBB Newbies
Offline
I love YaBB 1G -
SP1!
Posts: 36
Virginia
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #10 -
10/17/07 at 04:11:18
oops. let me try answering again. There is the wider, flat piece of metal that is horizontal (like the one in your pic). Then there is also two oblong pieces of metal welded to the bottom of the horizontal piece. These two pices go in the opposite direction (front to back) and have the two holes drilled into them. Hope this makes sense. If you need I could try to take a pic and email it to you.
Colleen
Back to top
IP Logged
Savage_Greg
Serious Thumper
Alliance Member
Offline
Don't go around your
ass to reach your
elbow...
Posts: 7844
SW Washington State
Gender:
Re: Boulevard Emission Cannister Thing?
Reply #11 -
10/17/07 at 07:09:18
Yeah, if you have the time, that would help. I might have a new project coming up
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/26/24 at 19:22:05
›
General Category
›
Rubber Side Down!
› Boulevard Emission Cannister Thing?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.