Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› I know there are plenty backfire threads, but...
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
I know there are plenty backfire threads, but... (Read 12 times)
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
I know there are plenty backfire threads, but...
10/04/07 at 17:26:58
... I'm trying to figure out all the different causes for it.
So far I know that a lean condition will cause this. However, are there circumstances where a rich condition will cause a backfire?
I just installed an HD muffler and i'm getting more backfiring before, but it's much more subdued. I don't get the "gun shot" loud bang, just a few garbles. However, I did notice that i'm getting flames coming out of the muffler, and when I filled up tonight, i only got 40mpgs this past tank (first tank with HD muffler).
I know that mufflers are supposed to increase flow and thus lean the system out, but why the drop in mileage? I didn't change my riding habits, at least not enough to warrant a 15mpg drop.
It seems that I am running rich, causing excess fuel (or at least incomplete combustion). Fumes or excess gas is gathering in the exhaust and then igniting as I slow down and back pressure increases. I have an 86 which from what i've read should have a slightly larger jet than later models.
I woudl appreciate some insight so that I know what areas to focus on. As a side note I have been using 89 octane lately. I'm also wondering if the higher octane rating could be making it more difficult for combustion and thus leading to excess fuel mixed in the exhaust. I don't have any black smoke so I know i'm not that rich, but I just can't explain the increase in fuel consumption.
Thanks.
Back to top
IP Logged
rigidchop
Serious Thumper
Offline
don't feed the drama
llama
Posts: 1105
ravenswood wv
Gender:
Re: I know there are plenty backfire threads, but.
Reply #1 -
10/04/07 at 17:34:13
maybe you are riding differently and just don't realize it. i can't imagine putting on a new part and riding the same way i did before, at least at first any way. you wanna listen to how different the bike sounds, runs etc.maybe give it a little time then see what happens.
Back to top
87 VM ED L
IP Logged
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
Re: I know there are plenty backfire threads, but.
Reply #2 -
10/04/07 at 17:38:58
I appreciate the suggestion but I only really use the bike to ride from home to work (all of 8 miles each way) and I still get to work in the same amount of time, so i'm fairly sure I haven't changed my habits. At least not enough to explain the significant drop in mileage.
Back to top
IP Logged
T Mack 1 - FSO
Serious Thumper
Alliance Member
Offline
sold 2001 LS650 for
a 1986 XLH1100
Posts: 2919
Emmaus,Pa
Gender:
Re: I know there are plenty backfire threads, but.
Reply #3 -
10/04/07 at 17:51:15
OK.....back to some basics. Best energy efficiency is at correct fuel to air mixture. That means the most power for fuel consumed. Most power means farthest distance traveled per gallon.
Too rich is dumping gas away. I think everyone understands that.
But, too lean means you're not getting an efficient burn. Not as much energy out. So, you have to open up the throttle more to get same response. But, more throttle is just dumping gas into a poor burn condition. You
aren’t
going to get the same energy out, so the gas won’t move you as far. Means poorer MPG…..
Even though you think you are driving the same, you really are using a tiny bit more throttle.
I hope this is understand-able.
Back to top
Engineers design things, Technicians make them work.
---
30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck
IP Logged
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
Re: I know there are plenty backfire threads, but.
Reply #4 -
10/04/07 at 18:02:55
T Mack 1 - FSO wrote
on 12/31/69 at 16:00:10:
But, too lean means you're not getting an efficient burn. Not as much energy out. So, you have to open up the throttle more to get same response. But, more throttle is just dumping gas into a poor burn condition. You
aren’t
going to get the same energy out, so the gas won’t move you as far. Means poorer MPG…..
Even though you think you are driving the same, you really are using a tiny bit more throttle.
I hope this is understand-able.
My understanding of that is just the opposite. Leaning out a mixture will get you MORE power. Increasing the air to gas ratio will increase the explosive nature of the fuel resulting in more power but at the same time more heat. Most tuners that adjust fuel maps lean out the mixture to get easy power and increase fuel mileage. However increasing it too much will cause too much heat that will damage engine components.
It's with that in mind that I feel I have a rich situation (lower mpgs and fire in the muffled [excess fuel]). However, most people say that backfiring is caused by a lean condition. How can a rich condition cause backfiring?
Back to top
IP Logged
barry68v10
Serious Thumper
Offline
Posts: 955
Maryland
Gender:
Re: I know there are plenty backfire threads, but.
Reply #5 -
10/04/07 at 18:20:29
Yes, a rich condition can cause what most people would call "backfiring", especially if you have an exhaust leak. If it's rich enough AND hot enough (with no exhaust leak) gas vapor will exit the muffler, THEN BURN. This is pretty spectacular...especially with a big v-8!
Back to top
petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...
IP Logged
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
Re: I know there are plenty backfire threads, but.
Reply #6 -
10/04/07 at 18:25:09
I do notice a small leak where the muffler and header meet. Would that cause air to be entering at that point and the heat cause combustion? That would mean that I have 2 problems
If I were to adjust the pilot screw, where should I start?
If I had my choice between rich and lean I would choose rich so that's good
Back to top
IP Logged
barry68v10
Serious Thumper
Offline
Posts: 955
Maryland
Gender:
Re: I know there are plenty backfire threads, but.
Reply #7 -
10/04/07 at 18:27:12
toddlamp8 wrote
on 12/31/69 at 16:00:10:
My understanding of that is just the opposite. Leaning out a mixture will get you MORE power. Increasing the air to gas ratio will increase the explosive nature of the fuel resulting in more power but at the same time more heat. Most tuners that adjust fuel maps lean out the mixture to get easy power and increase fuel mileage. However increasing it too much will cause too much heat that will damage engine components.
It's with that in mind that I feel I have a rich situation (lower mpgs and fire in the muffled [excess fuel]). However, most people say that backfiring is caused by a lean condition. How can a rich condition cause backfiring?
Hmmm...With a given timing set-up there is an ideal air/fuel mixture for both power and MPG and they are different. If you go too lean, the mixture won't even burn. If you lean the mixture to the 16-18:1 range AND retard timing you can increase mpg but heat build-up can become a problem. A given richer mixture requires more advanced timing and a given leaner mixture requires less. Got a way to change timing on your bike that's easy?
Actually, if you re-gap the spark plug you can effectively change timing somewhat. Smaller gap will act more like retarded timing...hotter/larger spark will act like more advanced timing.
Back to top
petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10661
Oklahoma
Gender:
Re: I know there are plenty backfire threads, but.
Reply #8 -
10/04/07 at 18:33:49
From what you have said the only change is the muffler. That said, go back and double-check that there are no air leaks in the exhaust system.
Back to top
IP Logged
barry68v10
Serious Thumper
Offline
Posts: 955
Maryland
Gender:
Re: I know there are plenty backfire threads, but.
Reply #9 -
10/04/07 at 18:35:41
toddlamp8 wrote
on 12/31/69 at 16:00:10:
I do notice a small leak where the muffler and header meet. Would that cause air to be entering at that point and the heat cause combustion? That would mean that I have 2 problems
If I were to adjust the pilot screw, where should I start?
If I had my choice between rich and lean I would choose rich so that's good
I would follow Lancer's tuning procedures listed in the tech section. The KLR650 guy lurking around here also posted a very effective tuning procedure specifically for our style carb (if it's stock.) The concept is, start with the main jet and work your way down to the pilot screw to tune the entire range.
One other thought, a muffler has specific flow characteristics for both volume and exhaust speed. The stock muffler is very hard to beat for low RPM torque. It actually creates a siphon effect which enhances low RPM flow vs. a more open exhaust. As RPMs build it will begin to restrict flow vs. your harley muffler. The size and length of exhaust header needs to work together with the design characteristics of the muffler for optimal broad RPM performance.
Back to top
petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...
IP Logged
barry68v10
Serious Thumper
Offline
Posts: 955
Maryland
Gender:
Re: I know there are plenty backfire threads, but.
Reply #10 -
10/04/07 at 18:37:36
LANCER wrote
on 12/31/69 at 16:00:10:
From what you have said the only change is the muffler. That said, go back and double-check that there are no air leaks in the exhaust system.
YES! What Lancer said. That's the place to start!
Back to top
petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...
IP Logged
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
Re: I know there are plenty backfire threads, but.
Reply #11 -
10/04/07 at 18:49:32
I will do that thanks.
Back to top
IP Logged
toddlamp8
Full Member
Offline
I love YaBB 1G -
SP1!
Posts: 241
Gender:
Re: I know there are plenty backfire threads, but.
Reply #12 -
10/04/07 at 20:16:50
Well when I was warming up the bike tonight before I left work I held my hand where the muffler and header meet and sure enough there is a pretty substantial leak. I'll have to tend to that tomorrow once things cool down.
How would that contribute to my issue? What does a leak in that particular area do to the system? I also noticed the the flames weren't shooting out until I slow down and hit ~2400RPMs and less. I also noticed a more intese exhaust smell.
Back to top
IP Logged
SavageWahine
Serious Thumper
Offline
Aloha & Hang
Loose
Posts: 1553
Beautiful Kauai!
Gender:
Re: I know there are plenty backfire threads, but.
Reply #13 -
10/05/07 at 12:23:26
LANCER wrote
on 12/31/69 at 16:00:10:
double-check that there are no air leaks in the exhaust system.
Thanks LANCER for that thought! I have non-stop backfiring when I reduce throttle or shift, since I did the carburetor.
I really catches everyone's attention, so maybe it's a safe thing to have happen! But I myself find it really annoying.
How would you go about finding an air leak?
Back to top
You take the blue pill the story ends, you wake up in your bed and believe whatever you want to believe.
You take the red pill, you stay in Wonderland and I show you how deep the rabbit hole goes.
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28637
Tucson Az
Gender:
Re: I know there are plenty backfire threads, but.
Reply #14 -
10/05/07 at 17:14:51
rich can cause backfire...air leak in the exhaust will too...
now,..about the mpg drop,..that's a big drop, check the vac line to the petc0ck, or your needle slide may be sticking. Sometimes by random coincidence, an unrelated problem starts up at the same time as a change you make, and fools you into thinking it's something you did. That big of a mpg change seems like a fuel problem and will cause sputtery backfires, bad mpg, smoke, poor running, etc. And if it's a fuel problem, it will get worse.
Back to top
Ludicrous Speed !... ...
...
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 18:41:17
›
General Category
›
Rubber Side Down!
› I know there are plenty backfire threads, but...
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.