SuzukiSavage.com - Dimensions of White Spacer

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Dimensions of White Spacer

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Dimensions of White Spacer (Read 11 times)

mark_k

Full Member

Offline

Posts: 114
Greenfield, IN
Gender: male

Dimensions of White Spacer
07/29/07 at 06:51:46

Have noticed that we talk a lot about 1/2 or 1/3 white spacer, but I suspect that a lot of the mod is eyeballing. What are the dimensions of the white spacer unmodified and susequently what would 1/2, 1/3, and 1/4 dimensions be?
Also has anyone mic'd the #4 washers and done a comparison to the white spacer? Ie, 1/3 white spacer = ? # of #4 washers.

Livin' Life Abundantly

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28907 L.A. California Gender:	Re: Dimensions of White Spacer Reply #1 - 07/29/07 at 07:14:07 Someone said the white spacer was 2.5mm (.100") thick. And the mod is to shave it down to half thickness or use the appropriate number of #4 washers.
Back to top	Versey's Place Tech Section Index IP Logged

Serowbot

YaBB Moderator
ModSquad

Offline

OK.... so what's the
speed of dark?

Posts: 28851
Tucson Az
Gender: male

Re: Dimensions of White Spacer
Reply #2 - 07/29/07 at 11:47:59

The stock one is 0.10" thick (measured with a vernier caliper). Usually mods go to a 0.065" = to 2/3's shave. (that's one #4 nylon washer from ace hardware, they come in black or white). I think some people use metal #4 washers and they must be a different thickness, because it seems to take a number of them to make the right thickness. Going from what I've read here.
The #4 nylon will give you a perfect 2/3's.

Ludicrous Speed !... ... Huh

...

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home