About the exhaust-
1.There are 2 nuts /12mm/ with washers,  that hold the muffler to the exhaust bracket. You will have to look under the exhaust. These are the first to go.
2. Take off the bolts that hold the header to the head /12mm socket or wrench//
3.take off the 2 nuts/17mm/, that hold the heat shield and the foot brake. You might have to use 14mm wrench to hold the bolts from the left side from spinning.
4. pull the exhaust like an assy.
About the gas tank- connect a long piece of hose to the petcock and turn it in PRI. before You start messind with the exhaust. Untill You are done with the exhaust , the gas will be in the gas can.

justin_o_guy wrote on 12/31/69 at 16:00:07:



Slavy's first step was talking about those particular bolts Justin. I had to read it twice to catch it also.