SuzukiSavage.com - Changing the oil seems impossible!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Changing the oil seems impossible!

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1 2

Changing the oil seems impossible! (Read 22 times)

tuxedo Senior Member Offline medium pimpin. Posts: 275 Hot Springs, AR Gender:	Re: Changing the oil seems impossible! Reply #15 - 07/20/07 at 02:08:08 umm....i can change the oil on my 86 with a huge 17mm wrench on my gravel(i use the term 'gravel' loosely....big friggin rocks) driveway. On the kickstand. Hot. Am I doing it wrong? Or are you guys changing the oil on a completely different bike?
Back to top	I like persons better than principles, and I like persons with no principles better than anything else in the world. 86 Savage IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Changing the oil seems impossible! Reply #16 - 07/20/07 at 05:38:45 I just do it on the sidestand in my garage but my drain plug is 15mm, I think. Anyway, no problems.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Changing the oil seems impossible! Reply #17 - 07/20/07 at 05:46:44 The "Poor Man's Bike Stand" and a floor jack work real well. Ah, Rob, it should be a 14 MM on yours
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Changing the oil seems impossible! Reply #18 - 07/20/07 at 06:14:46 Savage_Greg wrote on 12/31/69 at 16:00:07: Ah, Rob, it should be a 14 MM on yours That's probably right. I just remembered it was smaller than the 17mm mentioned in the manual. I think my magnetic plug is the same size as my OEM plug (which is the 14mm). Now I'll need to check just for the heck of it.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Pages: 1 2

« Home