SuzukiSavage.com - springer seat and passeger pad

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › springer seat and passeger pad

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

springer seat and passeger pad (Read 13 times)

SavageRichie

YaBB Newbies

Offline

The Devil Rides Out

Posts: 42
Albuquerque, New Mexico
Gender: male

springer seat and passeger pad
07/03/07 at 22:53:45

Team,

I am wrapping up my 99 savage bobber. It really looks great, i will post a few pix when all done. I would like to finish it off with a simple solo springer seat and simple pad. I can modify the stock pad as needed, cut it down by half foam and recover to match solo seat. I have seen several great solo seat mods here hence any input on a simple seat (where to get it and cost)along with any custom brackets you made to fit everything back together is appreciated. I have seen several on ebay, less than $40 even in leather but will it fit right?
trying to save me some time.

Thanks

Richie

99 Black Savage Bobber, steel forged by Suzuki, developed in Hell. Sinister, evil, and fathered by the devil.

99 Savage Bobber
73 Yamaha RD350 Cafe Racer
76 Suzuki TC100
82 Honda MB5
76 Z50 w

IP Logged

wvhunter62

YaBB Newbies

Offline

Posts: 35

Gender: male

Re: springer seat and passeger pad
Reply #1 - 07/04/07 at 07:47:48

I am kind of a rookie at this, but I'll show you what I did. After removing stock seat I formed a frame pan out of some scrap diamond plate I had lying around and bolted it to the frame rails. This gave me a place to mount the front bracket of my solo seat. For the rear I formed a bracket out of 1/8" steel that bolts to the original tabs for the stock seat. These tabs are not strong enough to support you alone make your bracket so you can attach it to the frame rails. You will also have to drill two holes for the rear mounting bolts to go thru. This is probably not the best way, but it has worked for over 1000 miles so far this year.
Tim
I'll take some better pics and post them if you want.

PS: the gap between the frame and pan is not there once attached.

When you receive the news that my guns have been confiscated,you will know that I am dead.

IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28657 Tucson Az Gender:	Re: springer seat and passeger pad Reply #2 - 07/04/07 at 10:34:01 These guys sell a nice one, I think some savager's have used. $35.00 http://www.crc2onlinecatalog.com/chopper.htm
Back to top	Ludicrous Speed !... ... ... IP Logged

Paladin. Serious Thumper Offline Hamster Posts: 4929 Sunny Southern California Gender:	Re: springer seat and passeger pad Reply #3 - 07/04/07 at 13:11:17 This seat looks comfy -- 13" wide, leather: -- $49.95 plus springs and shipping from JIREH.com (search for "solo" under Harley parts.)
Back to top	IP Logged

Dr_Jim Ex Member	Re: springer seat and passeger pad Reply #4 - 07/04/07 at 13:54:46 -
Back to top	« Last Edit: 12/23/07 at 14:44:02 by Dr_Jim » IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home