Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Replacing turn signals (Read 7 times)
Hiker
YaBB Newbies
*
Offline



Posts: 20

Gender: male
Replacing turn signals
05/23/07 at 08:36:47
 
I have been looking at replacement turn signals and it looks to me that some have two wires and some have one wire. Which do I need? I found these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=ST.... They look like the one wire type. Thanks for any advice.

Hiker
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28908
L.A. California
Gender: male
Re: Replacing turn signals
Reply #1 - 05/23/07 at 09:05:37
 
Turn signals will have 2 or 3 conductors (wire or metal bit) depending whether they are front or rear.  Some use ground as a conductor.  Our lights don't use ground as a conductor but it can be done.

Fronts should have running and turn lights.

Rears should have turn lights.
Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
11/18/24 at 00:27:20



General CategoryRubber Side Down! › Replacing turn signals


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.