Starlifter wrote on 12/31/69 at 16:00:05:Hmm, I see in the installion instructions for the LS650 Super Brace that "it may be necessary to move or purchase after market brake lines and horn."
Has anyone had to do that? Also how do the Super Brace fork shilds go on, and what is a good torque wrench to purchase for general use?
Thanks, Starlifter.
It's real easy, you don't move anything.
The Superbrace comes in 2 peices, there are 4 screws, you need an Allen key (not sure what size but it'll be in your set if ya got one)
Use an exacto knife (box cutter) to remove plastic fork guards. They come off easy just don't scratch the forks by slipping.
Put the 2 peices together with the specified gap over the fender, can't remember what it is but instructions will tell you.
Your supposed to loosen the fork bolt or something but I never did it, as long as your bike is standing up evenly it's ok.
Bounce the front end so that everything seems ok and the forks are even.
The fork shields just screw on takes 2 minutes, buy them together with the brace.
That's it from what I can remember not hard or time consuming maybe 20 minutes.
Ride safe.