SuzukiSavage.com - Drive Belt

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Drive Belt

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Drive Belt (Read 6 times)

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Drive Belt 05/02/07 at 01:46:18 How many teeth are in the drive belt?
Back to top	IP Logged

trooper3 Ex Member	Re: Drive Belt Reply #1 - 05/02/07 at 02:28:56 If you believe the 1986-1988 Clymer Manual I have, it says 133 teeth, but they've been wrong before! I haven't double checked by counting them.
Back to top	IP Logged

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: Drive Belt Reply #2 - 05/02/07 at 03:18:38 Yes, 133 teeth. But you can get a 135 tooth belt. It will only fit if you weld extra steel to the back of the frame so you can move the wheel back far enough to tighten it. BTW, the 135 tooth belt is MUCH cheaper...
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: Drive Belt Reply #3 - 05/02/07 at 04:45:50 Thanks
Back to top	IP Logged

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: Drive Belt Reply #4 - 05/02/07 at 04:58:07 BTW, that's one of the reasons I'm doing the chain conversion
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

justin_o_guy Ex Member	Re: Drive Belt Reply #5 - 05/02/07 at 05:57:20 I recently found a split in my belt.. I remember there being quite an uproar back there not long after I got the bike, my drive is a rock covered thing, one got on the belt & pinched on a pulley, bummer. Seems to be hanging in there well,, that was at least 8,000 miles ago.
Back to top	IP Logged

azjay Serious Thumper Offline aridzona... its a dry heat Posts: 816 Gender:	Re: Drive Belt Reply #6 - 05/02/07 at 07:06:16 yep, debby's roadking is belt driven, and pushed a rock through it, broke 1/4 mile from the house. we live on a gravel/dirt road and our drive way is crushed gravel/dirt. we haven't had a problem with the suzi belt, but i would suspect it is just a matter of time.
Back to top	dyna muff,1/2 spacer,152.5,55,drilled air box,idle mix,spark plug door,harley bars & seat,spitfire windshield,turn signal,dunlops,man.pethingy,ISO pegs,engine cage,hiway pegs,support 81 IP Logged

Rockin_John Serious Thumper Alliance Member Offline Posts: 1562 +36° 10' , -95° 48' Gender:	Re: Drive Belt Reply #7 - 05/04/07 at 01:13:30 barry68v10 wrote on 12/31/69 at 16:00:05: Yes, 133 teeth. But you can get a 135 tooth belt. It will only fit if you weld extra steel to the back of the frame so you can move the wheel back far enough to tighten it. BTW, the 135 tooth belt is MUCH cheaper... Mind passing on where you found a 135 tooth belt available?
Back to top	IP Logged

barry68v10

Serious Thumper

Offline

Posts: 955
Maryland
Gender: male

Re: Drive Belt
Reply #8 - 05/04/07 at 02:28:43

I haven't done a search for about 6 months, and can't find nearly what I could then. My #1 recommendation is to go to a Bando Belt distributor and check pricing. Ask to see a catalogue.

Another option is to go here and request a quote on a 133-tooth and 135-tooth Bando Poly-chain drive belt...

http://www.daltonbearing.com/Belt-Drives/Synchronous-Belts/Poly-Chain-Belt.asp

Again, like I said I haven't sniffed around for a belt in a little while so your actual results may vary. Grin

petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...

IP Logged

barry68v10 Serious Thumper Offline Posts: 955 Maryland Gender:	Re: Drive Belt Reply #9 - 05/04/07 at 02:31:38 And you might be able to buy different size pulley's here: http://www.daltonbearing.com/Suppliers/Bando-Belts.asp
Back to top	petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed... IP Logged

Rockin_John Serious Thumper Alliance Member Offline Posts: 1562 +36° 10' , -95° 48' Gender:	Re: Drive Belt Reply #10 - 05/04/07 at 13:16:35 barry68v10 wrote on 12/31/69 at 16:00:05: And you might be able to buy different size pulley's here: http://www.daltonbearing.com/Suppliers/Bando-Belts.asp Thanks, but I'd already Google'd up that site and have been cruising it for possibilities...
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home