SuzukiSavage.com - Flat-sided my Savage ....

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Flat-sided my Savage ....

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Flat-sided my Savage .... (Read 20 times)

Dr_Jim Ex Member	Flat-sided my Savage .... 04/23/07 at 20:37:26 -
Back to top	« Last Edit: 12/23/07 at 19:54:15 by Dr_Jim » IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Flat-sided my Savage .... Reply #1 - 04/23/07 at 20:41:01 I'd like to visit your garage sometime....
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10690
Oklahoma
Gender: male

Re: Flat-sided my Savage ....
Reply #2 - 04/23/07 at 20:46:42

Wow, what a great deal on a super carb. Working out the proper jetting could be a real fun job. When I first started playing with the Edelbrock carbs a few years back it took a while to get down to the right needle for it, and fortunately it was just the needle since it does not have a main or pilot jet. I was very short of money and could only get one needle at a time, and would have to wait weeks before trying another one.

IP Logged

Dr_Jim Ex Member	Re: Flat-sided my Savage .... Reply #3 - 04/23/07 at 20:59:09 -
Back to top	« Last Edit: 12/23/07 at 19:54:28 by Dr_Jim » IP Logged

azjay Serious Thumper Offline aridzona... its a dry heat Posts: 816 Gender:	Re: Flat-sided my Savage .... Reply #4 - 04/23/07 at 21:01:27 shweeeet project! anything to get rid of that d@mn cv carb! we are watching intently, for the much improved results.
Back to top	dyna muff,1/2 spacer,152.5,55,drilled air box,idle mix,spark plug door,harley bars & seat,spitfire windshield,turn signal,dunlops,man.pethingy,ISO pegs,engine cage,hiway pegs,support 81 IP Logged

Dr_Jim Ex Member	Re: Flat-sided my Savage Continued Reply #5 - 04/23/07 at 23:05:43 -
Back to top	« Last Edit: 12/23/07 at 19:54:46 by Dr_Jim » IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Flat-sided my Savage .... Reply #6 - 04/24/07 at 05:24:09 Yes, Mikuni for the BS40, does offer a 147.5 main. I put one in Stinger's a couple weeks ago... The clamp idea is unique. So you are using 3.5" coil springs on the seat? That's what I have, but mine got bound up and broke off the darned seat mounts...cheap Chinese welds, cheap Chinese metal....
Back to top	IP Logged

Dr_Jim Ex Member	Re: Flat-sided my Savage .... Reply #7 - 04/24/07 at 08:52:00 -
Back to top	« Last Edit: 12/23/07 at 19:55:03 by Dr_Jim » IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Flat-sided my Savage .... Reply #8 - 04/24/07 at 09:03:24 Too bad about the dual cable for the carb....but.... The throttle grip tube for the Savage for is made for dual cables. It has 2 cable connections, but since our bike only uses one, I imagine that if you find another Suzuki that uses the same grip tube, that you'll find a dual cable throttle assembly.
Back to top	IP Logged

justin_o_guy Ex Member	Re: Flat-sided my Savage .... Reply #9 - 04/25/07 at 01:48:47 My Suzuki, with a cam from Lancers buddies, a Supertrapp, gutted header, 155 main jet, 145 pounds of me, no windshield, sidecar or ballast, runs 89 mph, whatamIdewwinwrong?
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Flat-sided my Savage .... Reply #10 - 04/28/07 at 06:51:43 Like the the HSR V much, if things had been different I might of got one instead of FCR. Belmouth made by me. Accelerator pump on FCR is 0% through to 75% throttle. Clive W
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home