Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Help with muffler change
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Help with muffler change (Read 5 times)
Rockin_John
Serious Thumper
Alliance Member
Offline
Posts: 1562
+36° 10' , -95° 48'
Gender:
Re: Help with muffler change
Reply #15 -
03/31/07 at 00:57:11
smokey02 wrote
on 12/31/69 at 16:00:03:
BTW I'm 60 yr old Musician/Vacuum Tube Amp Technician
Not to hijack the OP's thread, as it seems she has gotten plenty of good info to go on. And welcome to her here!
Man we have our share of electronics techs, computer/network techs and musicians around here!
Back to top
IP Logged
rfvallejo
Ex Member
Re: Help with muffler change
Reply #16 -
05/15/07 at 23:27:55
Hello,
I keep reading about that "half spacer" but I don't know what that is.
Can anyone tell me please if the spacer can be bought or one just have to modify/cut/sand the stock one?
Thanks!
Rolando
Back to top
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: Help with muffler change
Reply #17 -
05/16/07 at 05:57:00
rfvallejo wrote
on 12/31/69 at 16:00:05:
Hello,
I keep reading about that "half spacer" but I don't know what that is.
Can anyone tell me please if the spacer can be bought or one just have to modify/cut/sand the stock one?
Thanks!
Rolando
I believe it's item #6 below and it has been identified in several other posts on the site too. You can replace it with a suitable washer simulating a 1/2 to 2/3 spacer or you can shave/sand the original. You could also buy another spacer and shave/sand it down, if you prefer.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
rfvallejo
Ex Member
Re: Help with muffler change
Reply #18 -
05/16/07 at 09:04:34
Thanks for your answer!
Is it under the spring?
I heard there is too much trouble to remove the screws to have access to the spacer. Is that so?
Thanks again!
Rolando
Back to top
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: Help with muffler change
Reply #19 -
05/16/07 at 09:25:48
Please take a look at the
Technical Documents/Reference
forum and read some of the carb and tuning posts like:
Mid-Range Power & the White Spacer (Backfire)
Lancer's Straight & Simple Carb Tuning
A Carburetor Primer
Carb Specs.
Carburetors 101
Idle Mixture Screw
Also, please be sure to read the sticky post near the top of that forum entitled
Posting Guidelines: DO NOT POST QUESTIONS HERE!
.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/22/24 at 04:27:12
›
General Category
›
Rubber Side Down!
› Help with muffler change
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.