Hiker
YaBB Newbies
Offline
Posts: 20
Gender:
|
OK, right or wrong this is what I did. I took off the seat, just so I could see what I was looking at. The silfer bullet shaped housing was cracked an taped. I took of the chrome fender rails, it was easier to take them both off I have a backrest and lugggage rack. II inspected the wires as and couldn't find any broken spots. What I thought was a hole turned out to be a pinch in the insolation. With my limited knowledge, I had done all I felt I could do. I decided to put it all back together and take it to the dealer for repair. After getting it all back together I wanted to check to make sure that what was working before I tool it apart was still working. I turned it on and everything works fine. Turn signals, tail light. I don't know what I did, but it is working for now. Also on the S40 the wires to the turn signals have the two wires going to a single plug for each side, and the broken part was the plastic bullet shaped part.
|