I recently bought a used Boulevard windshield supposedly for an S40 but I'm pretty sure now that it's actually a 990A0-70001 for an S50 or S83, and it didn't come with mounting hardware.  The windshield is 16" wide and 13.5 - 17" from headlight cutout to top of shield (depending on position of sliding insert).  The bracket mounts are 10.5" apart:



Could those of you with after-market fork-mounted windshields tell me what brand you have, the spacing between your windshield bracket mounts and whether the bracket on the windshield looks like this one or not?



I was looking at these mounting brackets:

but the fork tubes on the S40 are only 7.5" center to center and I'm thinking a custom 1.5" spacer on each side might be a bit much.

I'm going to see if I can find an S50 or S83 with an OEM shield on it to see how it mounts and the spacing, etc.

Any input is appreciated!

Thanks!!
Daniel

thats not the boulevard sport shield the dealer sells...for the s 40
the stock screen doesnt have the reinforcement metal strips just 4 holes and it is smaller..it is a national cycle product but (acorrding to N.C.)suzuki sources the mounts some place else..also nc is embossed down on the lower left inside...i still have an 05 brochure and yours looks like the one for the c 50 19w x 20 h,or the c 90 they offer two one ajustable 19 > 21h x 22w,no measurment given for the non adjustable...hope this helps..

Radioman, How do you like your Dakota windshield? I need a windshield for my 06. The Dakota sure is priced right. Thanks, Larry

flyer wrote on 12/31/69 at 16:00:03:

I have the same one and I like it a lot.

Well I received National Cycle's KIT-CJO today from Phat Performance and it fits perfectly!!