Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Cam chain job observations
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Cam chain job observations (Read 4 times)
franch
Senior Member
Offline
I love YaBB 1G -
SP1!
Posts: 287
Cam chain job observations
01/14/07 at 03:17:59
Well it took 2 tries but got it right. I was off by 2 teeth on the camshaft gear.
the hardest part is loosening the clutch bolt without special tool . i put her in gear and held the brake down, but then had a hell of a time putting it back in nuetral to keep finding TDC(you have to keep rotating engine to remove the camshaft gear bolts)
I hear people talk about hearing the chain slapping at idle.
mine used to make a squeel/whine when in 5th gear, which i always attributed to the speedo. wrong. it was the cam chain. as soon as I got into 5th after new chain i noticed how quiet it was.
i would recommend anyone who is concerned about theirs pop off the right side cover to at least inspect how much travel is left in their tensioner.
mine was about to completely spring out from it's housing.
thanks again to everyone here for your help !
Back to top
IP Logged
sparkett
Full Member
Offline
never ride faster
than your guardian
angel flys!
Posts: 168
central florida
Gender:
Re: Cam chain job observations
Reply #1 -
01/14/07 at 03:21:29
The thrill of victory!!!!
Congrats!
Back to top
1987 pet thingy, dyna muffler,dyna jet carb,K&N cone filter, still working on her!
IP Logged
barry68v10
Serious Thumper
Offline
Posts: 955
Maryland
Gender:
Re: Cam chain job observations
Reply #2 -
01/14/07 at 03:22:23
how many miles did the cam chain have on it?
Back to top
petc0ck mod, white spacer removed, 150 main jet, 12.5" shocks, 16" turnout muff, oil cooler mod, chain conversion, Tkat brace, external fuel filter, fuel screen removed...
IP Logged
justin_o_guy
Ex Member
Re: Cam chain job observations
Reply #3 -
01/14/07 at 06:22:03
Like Barry said, How many miles on the cam chain?
Also, How hard do you ride? Does that really make a difference? You folks who have been in these engines & seen the results of different riding styles. Is it keeping the oil changed that determines the life of the chain? Is it high RPM that gets 'em? I hear a whine in 5th, maybe I better look in there.
Spose it's time to buy a gasket.. anyone have a good source? Dangittt,
Back to top
IP Logged
franch
Senior Member
Offline
I love YaBB 1G -
SP1!
Posts: 287
Re: Cam chain job observations
Reply #4 -
01/14/07 at 15:31:43
there were 28600 odd miles on the 98 when I did the Cam chain.
I rode it since it had 16000 miles, before that I don't know but I ride 70% back roads with lots of down shifting and letting the engine do the breaking. 30% highway average 65mph. I like to use the low end and rip through 1st, 2nd and 3rd and then hang in 4th at 45-50 ish.
I should add that having a buddy sure helps when doing this job. second set of hands,eyes etc.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 22:33:08
›
General Category
›
Rubber Side Down!
› Cam chain job observations
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.