Paladin.
Serious Thumper
Offline
Hamster
Posts: 4929
Sunny Southern California
Gender:
|
They are single filament one wire lamps. At the rear you have two wires, positive and ground. The ground wire I would reterminate on a large round washer type connector and clamp under the mounting bolt -- that way yo do not rely on chassis ground for the lamp. On the front we have three wires, turn, run, and ground. Again I would connect the ground to the mounting stud, the turn signal lead will be connected to the lamp, the runnning light lead will be taped off, labeled, and parked. You will lose the amber running lights on the front. If this is legal and acceptable for you, go for it.
I haven't looked at the physical mounting and cannot say if they will physically mount without modifications.
|