SuzukiSavage.com - Valve to Rocker arm clearance

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Valve to Rocker arm clearance

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Valve to Rocker arm clearance (Read 1 times)

geo Full Member Offline I'm a Savage Posts: 204 Orlando Gender:	Valve to Rocker arm clearance 12/21/06 at 21:57:36 Have you ever observed the valve lash to decrease between adjustments? It would seem the lash should always increase between adjustments.
Back to top	Black 2002 Savage with SuperTrapp 13 discs, Dynajet Kit-DJ144, K&N drop-in, NGK-Iridium, Windscreen, Amsoil 10w-40, Metzeler ME880's IP Logged

azjay Serious Thumper Offline aridzona... its a dry heat Posts: 816 Gender:	Re: Valve to Rocker arm clearance Reply #1 - 12/22/06 at 06:48:38 air cooled vws decrease clearance(get tight) often as well, i suspect it to be the valve burning into the valve seat, and the valve seat pulling into the head, but i've never done a before and after diagnosis/comparison to confirm.
Back to top	dyna muff,1/2 spacer,152.5,55,drilled air box,idle mix,spark plug door,harley bars & seat,spitfire windshield,turn signal,dunlops,man.pethingy,ISO pegs,engine cage,hiway pegs,support 81 IP Logged

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Re: Valve to Rocker arm clearance Reply #2 - 12/22/06 at 06:49:02 Last time I did mine they were too tight. Now wether or not the service tech set them too tight at the dealership or they tightened themselves I have no idea. I couldn't even get the .003" feeler guage in there to start with.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home