SuzukiSavage.com - Head Cover Removal

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Head Cover Removal

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Head Cover Removal (Read 7 times)

vroom1776

Serious Thumper

Offline

Posts: 2110

Gender: male

Head Cover Removal
10/11/06 at 12:45:30

Hey Gang,

Two questions about removing the engine head cover...

1) Is it necessary to remove the L70* bolt to remove the headcover? See this diagram. Greg_650 says it comes off w/ the head cover...

2) Once all the bolts are removed, how hard should it be to actually remove the head cover? Any suggestions on where to pull or pry? I do not want to break any fins...

As a note, the factory service manual says not to remove the S30* bolt. This one keeps the cam in place...

Thanks,

V

IP Logged

bentwheel Serious Thumper 2005 No Login Offline Ride free, citizen Posts: 658 Sarnia, Ontario, Canada Gender:	Re: Head Cover Removal Reply #1 - 10/11/06 at 15:00:38 I recall there was one bolt that did not have to be removed. It is likely the one Greg refers to. I found it best to remove the cover by twisting it forward to clear the cam sprocket, then pulling it out to the left side.
Back to top	Bentwheel FSO 2006 Suzuki 650 V-Strom 1977 Yamaha XS360 1972 Honda CL175 IP Logged

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Re: Head Cover Removal Reply #2 - 10/11/06 at 16:06:02 I pulled mine out to the right side and I took out the L70 bolt as well. But then again I also took the engine mounts off of the frame for better clearance.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home