SuzukiSavage.com - Help with Jetting

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Help with Jetting

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Help with Jetting (Read 5 times)

Dynobob

Serious Thumper

Offline

2003 LS650 (with
Supertrapp)

Posts: 634
Northern Virginia
Gender: male

Re: Help with Jetting
Reply #15 - 09/08/06 at 09:01:02

Hashbrown wrote on 12/31/69 at 16:00:09:

Dynobob, will the supertrapp make my savage rumble? Im looking for a lower pitch as well as performance. Will it do that stock or do i have to adjust something?

The Supertrapp has great sound. I heard a soundclip here before I bought it and was sold. I'm running it just as it came out of the box. You can make it louder or quieter by adding or removing disks. This also changes backpressure and affects jetting a bit.

My Supertrapp is stock and I'm running the carb settings I posted above. The bike hauls butt Grin

IP Logged

Hashbrown Full Member Offline What can brown do for you! Posts: 235 Nashua, NH Gender:	Re: Help with Jetting Reply #16 - 09/08/06 at 09:10:04 Like i said, im a real newbie at this. When you say 1/2 white spacer, do you literally mean filing the spacer down to half its size?
Back to top	What can brown do for you! IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: Help with Jetting
Reply #17 - 09/08/06 at 11:14:53

Hashbrown wrote on 12/31/69 at 16:00:09:

Like i said, im a real newbie at this. When you say 1/2 white spacer, do you literally mean filing the spacer down to half its size?

Either that or by replacing it with washers equaling 1/2 to 2/3 the size of the spacer. Use stainless, brass or something that is petroleum resistant. You don't want it melting.

IP Logged

Dynobob Serious Thumper Offline 2003 LS650 (with Supertrapp) Posts: 634 Northern Virginia Gender:	Re: Help with Jetting Reply #18 - 09/08/06 at 17:56:04 Hashbrown wrote on 12/31/69 at 16:00:09: When you say 1/2 white spacer, do you literally mean filing the spacer down to half its size? Exactly that. I sanded mine with some fine grit sandpaper and measured it with a cheap micrometer. I suppose you could measure with a finely graduated ruler.
Back to top	IP Logged

Hashbrown Full Member Offline What can brown do for you! Posts: 235 Nashua, NH Gender:	Re: Help with Jetting Reply #19 - 09/11/06 at 07:12:16 Thanks alot guys for all your help, ill post some pics when im done with her
Back to top	What can brown do for you! IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home