Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Anyone installed a tach? (Read 5 times)
georgekathe
Ex Member




Anyone installed a tach?
08/25/06 at 19:28:00
 
Has anyone out there installed a tach on the Savage? (I have a '96)

I'm looking at the ones J.C. Whitney sells for around $40 that look to be electrically connected somewhere/to something (off the spark plug cable somehow or what?)

Any help would be greatly appreciated

George Wink
Back to top
 
 
  IP Logged
Trippah
Serious Thumper
*****
Offline

I ride, therefore I
am.

Posts: 2517
central Mass
Gender: male
Re: Anyone installed a tach?
Reply #1 - 08/25/06 at 19:35:06
 
in a related vein, I'd like to remove the instruement cluster from the tank, with a pod set up on the top of the tripple tree or handlebars.  Then I'd have a place for my coffee. Or could the space be filled in to increase fuel capacity..  Anyone seen either of these types of mod's in their travels?  Related cause I'd like either a speedo/tach combo on the bars, rather than on the tank.  georgekathe- not intending to hijack your thread, I think these are related ?'s.   If not, MODERATOR, please split this off, thank you.
Back to top
 
 
  IP Logged
georgekathe
Ex Member




Re: Anyone installed a tach?
Reply #2 - 08/25/06 at 20:27:35
 
no, mine is really much more simple - I wantr to leave evereything as it is & just bolt on a bolt-on tach in the middle of the handlebars.

the instrument cluster stays as is, so I see these as being two issues, not really related - mine is a simple anyone fitted such a tach & if so, how?

thanks, George Smiley
Back to top
 
 
  IP Logged
theikeman
Senior Member
****
Offline

Live each day as if
it were your last
...

Posts: 344
Gibsonton in South Florida
Gender: male
Re: Anyone installed a tach?
Reply #3 - 08/25/06 at 21:10:21
 
Th tachs that JC Whitney sells for 40 bucks are mechanical, won't work on our Savage, needs an electronic type for dual fire ignitions.
FYI
Ike
Back to top
 
 

1996 Just bought it, Maroon, so much to do, so little time ... Future adds: Iridium, dyna muff, air filter mod, fork brace, 1 piece seat, carb mod and more
  IP Logged
sluggo
Serious Thumper
ModSquad
*****
Offline

big singles lead,
twins follow the
pack

Posts: 4744
moses lake washington
Gender: male
Re: Anyone installed a tach?
Reply #4 - 08/25/06 at 21:46:30
 
i've said it before, i'll say it again.


we don't need no stinking tach's on a single   Grin

sure they look kewl, but in my humble opinion are totally unneeded.
Back to top
 
 


SINGLES RULE, HARLEYS DROOL

  IP Logged
Fat Bastard
YaBB Newbies
*
Offline



Posts: 47

Gender: male
Re: Anyone installed a tach?
Reply #5 - 08/25/06 at 23:41:00
 
I did.  I like the look..  and nice to see how far I can push it without going on the "red line"...

You can read about it here... I start writing a little down the page

http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;n...
Back to top
 
 
WWW   IP Logged
klx650sm2002
Serious Thumper
*****
Offline

The more I learn the
less I know.

Posts: 2041
Cumbria,England
Gender: male
Re: Anyone installed a tach?
Reply #6 - 08/26/06 at 04:18:34
 
KLX will take full throttle from 2000 rpm, any of you Savage guys with tach's go lower than that ?

Clive W  Cheesy
Back to top
 
 
  IP Logged
georgekathe
Ex Member




Re: Anyone installed a tach?
Reply #7 - 08/26/06 at 06:41:22
 
thanks for reply fat bastard. you too sluggo, but I even had a tach on the SR500 single I owned (iut came with same). agree hardly likely to redline Savage, but curious to see revs are in @ given time/speed/gear - got so used to it on other bikes after years of british iron & going over to jap or german with more instrumenmtation.

incidently, do you look like Warren Oates as well as quote him? (just curious...?)

George  Roll Eyes
Back to top
 
 
  IP Logged
thumperclone
Serious Thumper
Alliance Member
*****
Offline

PGR rider  riding
with respect

Posts: 6240
Grand Junction Colorado
Gender: male
Re: Anyone installed a tach?
Reply #8 - 08/27/06 at 08:23:22
 
(northern tool tach)i have a similar one from pit possee mounted on the bars  next to the brake reservoir..read out it kinda small
pick up work by induction, wrap the wire around the plug wire a few times (coil) electronics are not the greatest  so theres a slight delay .. i use it mainly for idle
speed  monitoring ,long stop lites @ too slow idle in the
summer makes for hot oil.for some reason bike idles faster in the cool hours(denser air?) than in the heat of the day...
Back to top
 
 

standing for those who stood for US
















  IP Logged
Ed L.
Serious Thumper
Alliance Member
*****
Offline

"We All go a
Little Crazy
Sometimes"
Norman Bates

Posts: 2808
Sunny Florida
Gender: male
Re: Anyone installed a tach?
Reply #9 - 08/27/06 at 12:46:31
 
I've been using one of thoses tachs for over a year, just wrap the pickup around the plug wire and hook up the ground. I mounted it on the left handle bar with black ty wraps. So far I like it, helps keep track of shift points and rpm on the superslab. The one I'm using has a self contained battey, once it is dead you toss the whole tach and get another one.
Back to top
 
 

Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink
  IP Logged
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: Anyone installed a tach?
Reply #10 - 08/27/06 at 14:31:27
 
Moderators do not have the capability to "split" a thread.  You basically need to copy your post and paste it into a new topic, then delete your original post if desired.
Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
Reelthing
Serious Thumper
Alliance Member
*****
Offline

Fish or ride that is
the question

Posts: 5397
Houston,Tx
Gender: male
Re: Anyone installed a tach?
Reply #11 - 08/27/06 at 20:31:32
 
I like um!

Back to top
 
 
  IP Logged
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Re: Anyone installed a tach?
Reply #12 - 08/28/06 at 07:31:55
 
There you go again:
Riders view




Oncommers view



Now I have to get rid of the OEM speedometer, close the hole in the tank and find a place for the Neutral light ( or not)

Installation as previously described.


Greetz
Kropatchek 8)
Back to top
 
 

Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
Reelthing
Serious Thumper
Alliance Member
*****
Offline

Fish or ride that is
the question

Posts: 5397
Houston,Tx
Gender: male
Re: Anyone installed a tach?
Reply #13 - 08/28/06 at 08:34:28
 
ok - you add a bike ? that's sure not a savage lurking to the side!
Back to top
 
 
  IP Logged
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Re: Anyone installed a tach?
Reply #14 - 08/29/06 at 02:50:01
 
Reelthing wrote on 12/31/69 at 16:00:08:
ok - you add a bike ? that's sure not a savage lurking to the side!


No, that's Bert's HD Roadking Classic with sooooo much chrome on it you could buy 2 Savages or S40 for it.


Greets
Kropatchek 8)
Back to top
 
 

Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
11/15/24 at 06:31:13



General CategoryRubber Side Down! › Anyone installed a tach?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.