Max_Morley
Serious Thumper
Offline
LT650 Luxury Touring & sidecar rig
Posts: 1490
Moses Lake. WA
Gender:
|
Tensioner, clip that holds the tensioner on the pin (just in case it flys away from you in the garage), cam chain, clutch cover gasket, new lock plate for clutch basket nut. No the head does not have to come over, only the top cover of the cam area. Be sure to position the engine at TDC firing position to the valve rockers and free when you R or R the cover. Good directions in the tech section. Be sure to use the bolt holder template that is there as those bolts are citical in placement. Also the idea of using cotton swabs to insure there is no residual oil in those bolt holes is important. Max
|