vroom1776
|
See also Lancer's "Pics of Parts" thread in the marketplace. Needs bigger valves. He's working on it. I'm guessing w/ a lot of head work, 97 mm, 2mm taller piston, reground cam, hot carb, hot exhaust, ceramic coated cyl, you could maybe get 65 ponies. That's a lot. One could also shave down the flywheel, depending on what you wanted, HP or torque (I believe that a lighter flywheel = less HP, more tq... not sure though). It MAY be possible to stroke the engine, but I doubt it. Oen might be able to get away with a 2 mm stroke, but that's it, and it wouldn't work w/ a taller piston. Unless you had a brand new head designed and made... BIG $$$. W/ the turbo or super, youy can really only run a couple of lbs w/o exploding the engine, I believe. and as far as weight goes, -7 lbs = + 1 HP, roughly. go on a diet. Peopel have even talked about using titanium bolts for to save weight. You could probably save about 5 lbs. maybe. Rip off the front brake. Smaller and aluminum everything. Marchensini (SP?) rims for about 1k $each. narrower rear tire.... it never ends... until you start sanding down the frame.
|