SuzukiSavage.com - Exhaust Port

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Exhaust Port

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Exhaust Port (Read 8 times)

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Exhaust Port 03/19/06 at 04:10:28 It's been a long time since I've asked this one so I'll ask it again. Has anybody modified the Savage exhaust port ? Could you give details ? Clive W
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10674 Oklahoma Gender:	Re: Exhaust Port Reply #1 - 03/19/06 at 04:38:14 Clive, are you afflicted with oldtimers disease? Have you forgotton the earlier discussions? Or do you just like this subject so much that you want more of it?
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Exhaust Port Reply #2 - 03/19/06 at 07:18:15 Hey Lancer I must be afflicted with something, the way I remember things it was o.k. to open the round bit up to 38mm but there was a ? over how much could be taken off the flat piece in the top of the port. Please correct me. Clive W
Back to top	IP Logged

slavy Serious Thumper Offline smart cars for stupid people Posts: 710 Phoenix, Arizona Gender:	Re: Exhaust Port Reply #3 - 03/19/06 at 08:12:03 I shaved the most protruding part about 1/4" and rounded it as much as I could, so there are no sharp edges. I was scared to take more material, so I don't make a hole. The thing is- I don't want to make a statement that I got X horse powers thanks to the mod.
Back to top	The arificial intelligence is no match for the natural stupidity IP Logged

woodworker

Ex Member

Re: Exhaust Port
Reply #4 - 03/19/06 at 08:47:22

klx650sm2002 wrote on 12/31/69 at 16:00:03:

Hey Lancer

I must be afflicted with something, the way I remember things it was o.k. to open the round bit up to 38mm but there was a ? over how much could be taken off the flat piece in the top of the port. Please correct me.

Clive W Cheesy

Clive;
check out this linkhttp://suzukisavage.com/cgi-bin/YaBB.pl?action=search2
Sorry guys; I don't know how to specify a search string!

IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Exhaust Port Reply #5 - 03/19/06 at 08:54:36 Hey Woodworker I've been "search" ing for You with no luck, and now You are here I can't get into Your link. Clive W
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Exhaust Port Reply #6 - 03/20/06 at 05:48:56 Thanks Slavy That's the type of information I was looking for. Clive W
Back to top	IP Logged

Ed L. Serious Thumper Alliance Member Offline "We All go a Little Crazy Sometimes" Norman Bates Posts: 2808 Sunny Florida Gender:	Re: Exhaust Port Reply #7 - 03/20/06 at 06:31:13 Has anybody taken a totally f0cked up head and seen how far out the exhaust port can be opened up. The only way we can know how far to go is by going too far. Using a destroyed head to experiment with might be the way to go, we wouldn't need to worry about screwing up something already trashed.
Back to top	Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Exhaust Port Reply #8 - 03/20/06 at 06:39:46 been trying to lay hands on a test head - just are not many around - guess the rod throwing isn't very common
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home