thumperclone
Serious Thumper Alliance Member
Offline
PGR rider riding with respect
Posts: 6142
Grand Junction Colorado
Gender:
|
i m installing a pair of 20watt halogen clear lens markers (due in today) installed the coil of a relay to the low beam circuit .the non lighted switch in left cover just below key relay under seat on cross piece where the air snorkel used to be..superate fused(5 amp) circuit to the battery thru switch then thru relay to lights ... relay does following ...1)if i forget to turn switch off aux goes off with key..2) during start up aux lites off with low beam 3) aux off with high beam.. my switch is lighted but didnt wire the light so if switch is left on no battery drain main fuse is 20 amps x 80% = 192 watts so seperate circuit to new lights stator should have no prob with this new load update3/14..had the r3ely in the wrong place and ruined it the first time i sat on the seat(measure twice..) got it tab side to the right rail by the starter selonid and tye wrapped to the cable assy there..lites work great still messin with the aiming... drivers def notice spec when i blaze their left door mirror..
|