SuzukiSavage.com - Decompression valve cable ?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Decompression valve cable ?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Decompression valve cable ? (Read 3 times)

Bobster Ex Member	Decompression valve cable ? 03/01/06 at 20:15:13 I finished my head plug install and tried to adjust the cable. I have a clymer manual but i cant seem to understand how to adjust this thing. I also adjusted the valves while i was there. Both exaust were loose and both intake were tight. Anyway, I dont think the manual explains it very well.
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Decompression valve cable ? Reply #1 - 03/01/06 at 20:42:23 Working from memory here as at the moment both bikes have the tanks on them .... there's a black rubber cap the covers the back side of the solenoid - take this off and seat the rod from the front (port side) - where the rod comes out is where the black cover was - measure it there
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Decompression valve cable ? Reply #2 - 03/01/06 at 20:45:40 oh yeah make sure your at tdcc when you do this
Back to top	IP Logged

Bobster Ex Member	Re: Decompression valve cable ? Reply #3 - 03/01/06 at 21:06:08 Ok thanks, I;ll check it tommorrow. Its still at TDC, even tho i dont see how it matters. The adjustment is made away from the engine. ??? oh well.
Back to top	IP Logged

bentwheel Serious Thumper 2005 No Login Offline Ride free, citizen Posts: 658 Sarnia, Ontario, Canada Gender:	Re: Decompression valve cable ? Reply #4 - 03/01/06 at 21:28:26 If you did a search you would find this. http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;n... And oh yeah, it makes a difference if it is at TDCC. For the same reason you cannot properly adjust your valves if you are not at TDC, applies to the de-compression adjustment.
Back to top	Bentwheel FSO 2006 Suzuki 650 V-Strom 1977 Yamaha XS360 1972 Honda CL175 IP Logged

Bobster Ex Member	Re: Decompression valve cable ? Reply #5 - 03/02/06 at 07:42:12 Actually did a search and didnt see that one. It seems more clear. But thanks for the effort of posting that link.
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Decompression valve cable ? Reply #6 - 03/02/06 at 07:51:38 Bentwheel, Please post the desired topic and the search criteria you used for that in the USE the SEARCH Facility thread for future reference when you get a chance. Thanks.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home