SuzukiSavage.com - Carb problem?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Carb problem?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Carb problem? (Read 2 times)

grapefruit Ex Member	Carb problem? 02/25/06 at 10:56:44 Waiting for new, bigger main jet i decided to try the bike with only spacer mod. I put in back all the jets, started the engine and...only highest rpm are available I tried several times - the same. I thought if only spacer was changed this is the reason, so i tried original white spacer and...the same situation, only highest rpm. What i do wrong?
Back to top	IP Logged

pgolden Ex Member	Re: Carb problem? Reply #1 - 02/25/06 at 10:58:25 Do you mean it will only run at high rpm?
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #2 - 02/25/06 at 11:00:10 The bike started from highest rpm, and knows only highest rpm....
Back to top	IP Logged

pgolden Ex Member	Re: Carb problem? Reply #3 - 02/25/06 at 11:02:36 You either have a vacuum leak, or something is wrong with the needle jet. (the 2" rod that you removed to do the spacer mod). Did you get the little spring back on the needle jet? Also check to make sure the throttle cable is working freely.
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #4 - 02/25/06 at 11:07:25 This little spring is on its place. Vacuum leak?
Back to top	IP Logged

pgolden Ex Member	Re: Carb problem? Reply #5 - 02/25/06 at 11:10:17 A vacuum leak will not cause real high rpms, let's focus on the throttle cable sticking. I have to take my son to baseball practice right now, I'll check back after while.
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #6 - 02/25/06 at 11:20:53 The throttle cable seems to be ok...
Back to top	IP Logged

pgolden Ex Member	Re: Carb problem? Reply #7 - 02/25/06 at 16:57:09 Did you adjust the idle speed screw? (The thumb screw on the left side of the carb)
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #8 - 02/25/06 at 23:58:39 Do you mean the idle speed screw from this picture? No, i didnt touch it.
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Carb problem? Reply #9 - 02/26/06 at 06:47:57 Help me understand - the engine will only run at very high rpm? Because you had the slide out that is where I would look first. If the slide is sticking and not going all the way down the engine would act like that. It needs to be very clean and free to move. Make sure the large spring that pushes the slide down is installed correct.
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #10 - 02/26/06 at 13:15:59 The problem is solved. It was the throttle cable yet...very cold in my garage so i was in a hurry and didnt notice that...thank you pgolden and Reelthing for your useful suggestions.
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Carb problem? Reply #11 - 02/26/06 at 14:24:49 glad you got it squared away - bundle up and take it for run - easy for me say when it's 75f outside here
Back to top	IP Logged

grapefruit Ex Member	Re: Carb problem? Reply #12 - 02/26/06 at 22:56:13 I'm jealous, -3C/27F here
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home