Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› How to remove snorkel & replace with K&N
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
How to remove snorkel & replace with K&N (Read 14 times)
bikingb
Senior Member
2005 No Login
Offline
Love to Ride!
Posts: 278
Appleton, WI
Gender:
How to remove snorkel & replace with K&N
02/24/06 at 17:41:21
Anyone have photos? I'm thinking that the snorkel is that rubber thing that attached the carb to the back of the bike. I can't tell from your descriptions where you bolted on the K&N cylinder filter. I know I'm mechanically challenged.
Back to top
Let yourself be silently drawn by the stronger pull of that which you really love..... Rumi
http://bikepics.com/pictures/598442
IP Logged
Reelthing
Serious Thumper
Alliance Member
Offline
Fish or ride that is
the question
Posts: 5397
Houston,Tx
Gender:
Re: How to remove snorkel & replace with K&
Reply #1 -
02/24/06 at 19:36:03
The snorkel is the rubber tube that fits into the top of the air box right under the seat - let me suggest you leave it in place for now. Access to the air box for the filter change is through the right side (starboard) cover - it says ls650 on it or savage depending on what year you have right beside the toolbox cover - when you take that cover off you see the airbox cover where the stock airfilter goes or a K&N drop in - if you reach in there - at the top is the snorkel and you just push up on it and maybe pull a little at the top and it pop out, however you maybe at risk of changing too many things all at once - I suggest you get the carb back on running correct before to take on the air flow side of it.
Back to top
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: How to remove snorkel & replace with K&
Reply #2 -
02/24/06 at 21:24:27
I agree. While I'm a fan of the snorkelectomy, I am also an advocate of making changes separately as much as possible to isolate troubleshooting and tuning.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
Steve530
Senior Member
2005 No Login
Offline
Posts: 452
Knoxville, TN
Gender:
Re: How to remove snorkel & replace with K&
Reply #3 -
02/24/06 at 22:50:09
You might be confused about the 2 styles of K&N filters that are used.
One is a direct replacement for the stock filter. It goes in the stock airbox. This is the filter setup that benefits from removal of the snorkel. Some people remove of cut holes in the air box door, too.
The other filter setup is a cone filter. This attaches directly to the rear of the carb.
Back to top
'97 Black / 1/2 white spacer
155 main jet / 55 pilot jet / Dyna muffler
snorkel removed / K&N drop in / seat raised
Slipstreamer SS30 windshield
IP Logged
klx650sm2002
Serious Thumper
Offline
The more I learn the
less I know.
Posts: 2041
Cumbria,England
Gender:
Re: How to remove snorkel & replace with K&
Reply #4 -
02/25/06 at 02:41:58
I'd go for the K&N cone (pod) filter.
Clive W
Back to top
IP Logged
bikingb
Senior Member
2005 No Login
Offline
Love to Ride!
Posts: 278
Appleton, WI
Gender:
Re: How to remove snorkel & replace with K&
Reply #5 -
02/25/06 at 05:04:31
O.K. O.K. one thing at a time. I just figure the bike's all apart and everything. It is just so much fun making changes.
I saw one guy's photos it looks like he doesn't even have an air box on the back. Maybe that is the full-on snorkelectomy.
But, it makes sense to isolate mods for trouble shooting. I just hope the bike starts again when it is all back together. I know my battery is good.
Back to top
Let yourself be silently drawn by the stronger pull of that which you really love..... Rumi
http://bikepics.com/pictures/598442
IP Logged
Steve530
Senior Member
2005 No Login
Offline
Posts: 452
Knoxville, TN
Gender:
Re: How to remove snorkel & replace with K&
Reply #6 -
02/25/06 at 06:04:48
Yep, if you change 5 things all at once and it doesn't work, you have to backtrack to figure out what's wrong.
Either the cone or the panel filter are an improvement from what I've read. The panel filter with or wtihout the snprkel delete retains the stock look. The cone filter would look more "custom". I don't think anyone has data that would tell you which is best.
Back to top
'97 Black / 1/2 white spacer
155 main jet / 55 pilot jet / Dyna muffler
snorkel removed / K&N drop in / seat raised
Slipstreamer SS30 windshield
IP Logged
SAMM
Serious Thumper
Offline
No lay down crotch
rocket for me
Posts: 576
Portland Oregon
Gender:
Re: How to remove snorkel & replace with K&
Reply #7 -
02/25/06 at 09:51:06
If you plan to ride in the rain...Stick with the flat original style filters...The cone filter is exposed to the rain !!
And if you eliminate the air box you need to figure out how to vent the engine breather....
Back to top
My Bike My Mistress ( so my wife calls her )
IP Logged
bikingb
Senior Member
2005 No Login
Offline
Love to Ride!
Posts: 278
Appleton, WI
Gender:
Re: How to remove snorkel & replace with K&
Reply #8 -
02/25/06 at 13:51:30
I think I'll stick with the original air box set-up. I do ride in the rain. I have a question about the K&N drop in filter though. I think I asked somewhere else. When I ordered one it didn't have any way to be attached to the airbox. Maybe hence the name drop in. It is the right size it just doesn't attach to the box anywhere. It stock filter came with a frame and a screw that attaches the filter.
Back to top
Let yourself be silently drawn by the stronger pull of that which you really love..... Rumi
http://bikepics.com/pictures/598442
IP Logged
Steve530
Senior Member
2005 No Login
Offline
Posts: 452
Knoxville, TN
Gender:
Re: How to remove snorkel & replace with K&
Reply #9 -
02/25/06 at 15:46:31
My K&N panel "drop-in" filter came with a small bracket that holds the filter in place.
Back to top
'97 Black / 1/2 white spacer
155 main jet / 55 pilot jet / Dyna muffler
snorkel removed / K&N drop in / seat raised
Slipstreamer SS30 windshield
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: How to remove snorkel & replace with K&
Reply #10 -
02/25/06 at 23:19:01
I like the K&N direct replacement (or drop-in) filter and pulling the snorkel can increase your airflow later if you decide you need that. If you do, it's very easy to remove. You simply pull the seat and you'll be able to see the air entry above the air box. There's a rubber boot that is divided into two halves. That's the snorkel (#10 below). I just grabbed it with pliers and yanked it out. You may not want to though. Just wait and see.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
klx650sm2002
Serious Thumper
Offline
The more I learn the
less I know.
Posts: 2041
Cumbria,England
Gender:
Re: How to remove snorkel & replace with K&
Reply #11 -
02/26/06 at 02:13:27
Does Lancer do a V-stack for the std. carb. That and a sock (pod without the rubber moulding) cable tied on would be good. Piper Cross do sock filters over here.
Clive W
Back to top
IP Logged
LANCER
Serious Thumper
Alliance Member
Online
Savage Beast
Performance Parts
Posts: 10673
Oklahoma
Gender:
Re: How to remove snorkel & replace with K&
Reply #12 -
02/26/06 at 06:17:54
klx650sm2002 wrote
on 12/31/69 at 16:00:02:
Does Lancer do a V-stack for the std. carb. That and a sock (pod without the rubber moulding) cable tied on would be good. Piper Cross do sock filters over here.
Clive W
What do you mean by "V-stack"?
Back to top
IP Logged
klx650sm2002
Serious Thumper
Offline
The more I learn the
less I know.
Posts: 2041
Cumbria,England
Gender:
Re: How to remove snorkel & replace with K&
Reply #13 -
02/26/06 at 07:39:09
V-stack or bellmouth or ram pipe.
Clive W
Back to top
IP Logged
Dynobob
Serious Thumper
Offline
2003 LS650 (with
Supertrapp)
Posts: 634
Northern Virginia
Gender:
Re: How to remove snorkel & replace with K&
Reply #14 -
02/26/06 at 11:20:25
LANCER wrote
on 12/31/69 at 16:00:02:
What do you mean by "V-stack"?
I think he means velocity stack.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/10/24 at 03:23:41
›
General Category
›
Rubber Side Down!
› How to remove snorkel & replace with K&N
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.