Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Chopper Kit Done! (Read 16 times)
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: Chopper Kit Done!
Reply #15 - 01/27/06 at 18:45:53
 
Very nice indeed!  Is that the Seeger kit?
Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
jrm8486
Ex Member




Re: Chopper Kit Done!
Reply #16 - 01/27/06 at 19:23:26
 
Yes it is a Seeger Kit, I'm still waiting for the forward controls.
Back to top
 
 
  IP Logged
Paladin.
Serious Thumper
*****
Offline

Hamster

Posts: 4929
Sunny Southern California
Gender: male
Re: Chopper Kit Done!
Reply #17 - 01/27/06 at 20:37:11
 
jrm8486 FSO X2 wrote on 12/31/69 at 16:00:01:
Can't put the blinkers on the the bars, then it won't fit into my door to my porch!

Turn signals are not required in FLorida.

I was going to suggest turn signals that clamped to and hung under the handlebars, like the ones I took off my '74 Enduro-- couldn't find any on the web!
Back to top
 
 
WWW   IP Logged
jrm8486
Ex Member




Re: Chopper Kit Done!
Reply #18 - 01/28/06 at 04:28:56
 
Trust me you want to have as many lights as you can down here so they might see you!
Back to top
 
 
  IP Logged
Jim_R
Ex Member




Re: Chopper Kit Done!
Reply #19 - 01/28/06 at 06:05:47
 
I saw turn signals on the front side (facing the bike's forks)mirrors before.  Too bad they cost over 100 and u still have to worry about hiding the wires.
Back to top
 
 
  IP Logged
Mr 650
Serious Thumper
*****
Offline

The LS650- Classic
style & 4-valve
engine

Posts: 1389
Mempho
Gender: male
Re: Chopper Kit Done!
Reply #20 - 02/24/06 at 17:38:46
 
trick!
Back to top
 
 

SilverBlue '01,K&N,Snorklectomy,125mm NOS carb, 1/2 spacer & 155, 'Trapp, NC flyscreen, Suzy GelSeat, Osram H4
later..putt. Putt, PUtt, PUTT! 8)
HelmetLawsSuck
  IP Logged
klx650sm2002
Serious Thumper
*****
Offline

The more I learn the
less I know.

Posts: 2041
Cumbria,England
Gender: male
Re: Chopper Kit Done!
Reply #21 - 02/25/06 at 02:17:49
 
Hey jrm,
What length are Your forks, top to axle. Mine are 36".

Clive W  Cheesy
Back to top
 
 
  IP Logged
jrm8486
Ex Member




Re: Chopper Kit Done!
Reply #22 - 02/25/06 at 06:07:52
 
38" from top to axle. the tubes are 8" over stock and the rake is 13 degree
Back to top
 
 
  IP Logged
Violent_Rage
Senior Member
****
Offline

Burp!

Posts: 282
Trento - Italy
Gender: male
Re: Chopper Kit Done!
Reply #23 - 02/26/06 at 15:37:51
 
How difficult is to convert a Savage into a Chopper?
Back to top
 
 
  IP Logged
jrm8486
Ex Member




Re: Chopper Kit Done!
Reply #24 - 02/26/06 at 17:50:42
 
Buy the kit and bolt it on, the hardest part was getting the tubes separated.If you decide to do the kit take the tubes to a shop and have them unscrew the bottom tubes with a impact wrench.
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
10/10/24 at 11:23:03



General CategoryRubber Side Down! › Chopper Kit Done!


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.