LANCER
Serious Thumper Alliance Member
Offline
Savage Beast Performance Parts
Posts: 10661
Oklahoma
Gender:
|
Hi dude!
I have to agree with the others. It is always good to learn how to fix your own stuff.
Take carb apart, clean thoroughly, make sure all tiny passages are clear, put in new gaskets/seals, check float level adjustment. And, as long as you have it apart, replace the main jet and pilot jet with one size larger jets.
Take you gas tank and use a rust remover to clean it out, then put in a sealer. That way you will never have a rust problem again.
Good luck, we are here for you.
|