SuzukiSavage.com - Anyone know socket size for drive pulley?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Anyone know socket size for drive pulley?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Anyone know socket size for drive pulley? (Read 0 times)

realdeal Junior Member Offline Thumpity, thumpity, thump... Posts: 55	Anyone know socket size for drive pulley? 11/11/05 at 05:32:35 I'm in the process of pulling the motor, and i'm to the point where i need to remove the drive pulley. Unfortunately, i don't have a socket that big. Does anyone know what size socket i need? I'd like to head out at lunch today and buy one. Thanks! -Neil
Back to top	IP Logged

torque

Serious Thumper
2005 No Login

Offline

2008 nightster,flat
od green and black

Posts: 748
rock hill,S.C.
Gender: male

Re: Anyone know socket size for drive pulley?
Reply #1 - 11/11/05 at 06:41:02

the size is 1 1/4. you'll need a impact gun with at least 400 ftlbs of torque. or u can use a breaker bar ,and have a couple buddys hold on to the bike,and apply the rear brake,so the wheel dosent spin.

if u cant get the nut off take the belt side shock off and the engine will come out with the belt attached.

hope this helps Wink

IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Anyone know socket size for drive pulley? Reply #2 - 11/11/05 at 06:57:04 be interesting to see how tight the nut is on your bike, a couple of us have found the nut to have 20ft/lbs or less
Back to top	IP Logged

torque Serious Thumper 2005 No Login Offline 2008 nightster,flat od green and black Posts: 748 rock hill,S.C. Gender:	Re: Anyone know socket size for drive pulley? Reply #3 - 11/11/05 at 07:11:13 Reelthing wrote on 12/31/69 at 16:00:11: be interesting to see how tight the nut is on your bike, a couple of us have found the nut to have 20ft/lbs or less man i couldn't even budge mine with a IR THUNDER GUN,i had to wait for my dad too come home so i could use his 1inch drive CP gun
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Anyone know socket size for drive pulley? Reply #4 - 11/11/05 at 09:56:26 32 MM.
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Anyone know socket size for drive pulley? Reply #5 - 11/12/05 at 01:59:56 Yes metric. Clive W
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home