SuzukiSavage.com - mac slip on

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › mac slip on

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

mac slip on (Read 2 times)

shawn_b Ex Member	mac slip on 08/02/05 at 10:32:03 where is the best place to buy on are they easy to put on/no rigging and do i need to re jet to carb bone stock 2000 thanks for all the help shawn
Back to top	IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: mac slip on
Reply #1 - 08/02/05 at 10:48:03

shawn_b wrote on 12/31/69 at 16:00:08:

where is the best place to buy on are they easy to put on/no rigging and do i need to re jet to carb bone stock 2000 thanks for all the help

shawn

I got mine from Mac Performance. It's a piece of cake to install since it's made to fit the bike. Be sure you clean your skin oild off of it well after installing before you heat it up or it'll be tough to clean. I would suggest you also get the two exhaust gaskets from a dealer, BikeBandit.com or RonAyers.com and install new gaskets when you do this. I would definitely rejet to at least a 152.5. If you improve your air filter, go with a 155 or 157.5. You'll probably have to play with it a bit to see what's best for you. Fortunately, main jets are about $3 each.

IP Logged

shawn_b Ex Member	Re: mac slip on Reply #2 - 08/02/05 at 11:09:16 how do you change the main jet is the mac pretty loud shawn
Back to top	IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: mac slip on
Reply #3 - 08/02/05 at 12:03:16

The MAC is fairly loud and the MP3 clips are available in a thread called "Savage Sounds (mufflers)" in the Technical Corner. Remember not to post comments or questions there though.
The main jet is in the bottom of the carb and requires you to remove the float bowl. It takes four screws and you'll probably need an offset screwdriver for two of them. I would suggest you replace those four screws with stainless allen screws and lockwashers to ease future access. Please refer to your Clymer's or Suzuki manual for an exploded view of the carb. If you don't have one, I'd suggest you get one. In the mean time, try the microfiche at either RonAyers.com or BikeBandit.com.

IP Logged

shawn_b Ex Member	Re: mac slip on Reply #4 - 08/02/05 at 23:25:12 thanks i have heard the mp3 good but not like the real thing shawn
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: mac slip on Reply #5 - 08/03/05 at 06:04:29 shawn_b wrote on 12/31/69 at 16:00:08: thanks i have heard the mp3 good but not like the real thing shawn It's pretty close. I recorded the MAC MP3 from my bike.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

theikeman Senior Member Offline Live each day as if it were your last ... Posts: 344 Gibsonton in South Florida Gender:	Re: mac slip on Reply #6 - 08/03/05 at 16:14:25 Here's a really good deal on a supertrapp http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4565984002&rd=1
Back to top	1996 Just bought it, Maroon, so much to do, so little time ... Future adds: Iridium, dyna muff, air filter mod, fork brace, 1 piece seat, carb mod and more IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home