vroom1776
|
Hey folks,
So forget my "Hop Up?" post. How do I fix my problem?
Problem:
For a while, the bike didn't run as the spark plug kept turning black. I pulled the carb, thinking it was running rich at 4200 feet in CO, and I still have the stock jets in there. When I put it back in did not adjust the idle mixture screw. I installed a new spark plug (ignition) wire and half of the coil, which comes with that wire, as well as the high tension seal and SP cap (the old one was at 22000 Ohms, the new at something like 20 Ohms. Ran great... for 5 days. Now It is hard to start and won't idle without some throttle, and even then it is definetly missing. I ahve not had a chance to check the plug, but will do so tomorow; I assume it is black.
It is a 97. I got it in "02 with about 8000 miles, and I've ridden it pretty hard (cross country twice... had to have the timing redone after that). It now has 21000 miles on it.
So, Idle mixture screw, seals, what?
Any help is appreciated.
Thanks,
KS
|