Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Carburetor Specifications (Read 2698 times)
verslagen1
YaBB Moderator
ModSquad
*****
Online

It's not a backfire,
It's a belch of
POWER!

Posts: 24622
L.A. California
Gender: male
Re: Carburetor Specifications
Reply #15 - 03/20/16 at 14:39:14
 
california carb epa port to the left.
standard vacuum port to the right shown capped.

Back to top
 
 

WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Online

It's not a backfire,
It's a belch of
POWER!

Posts: 24622
L.A. California
Gender: male
Re: Carburetor Specifications
Reply #16 - 08/03/17 at 19:50:18
 
Back to top
 
 

WWW   IP Logged
piedmontbuckeye
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 414
Easley, SC
Gender: male
Re: Carburetor Specifications
Reply #17 - 09/09/17 at 15:10:36
 
I know it is in the site somewhere, but darned if I can find it.  Does anyone know the sizes of the various screws INSIDE the carb?
Back to top
 
 

"The difference between death and taxes is that death doesn't change every time congress meets." - Will Rogers
  IP Logged
marccarrion
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 19

Re: Carburetor Specifications
Reply #18 - 10/07/17 at 16:14:58
 
My four top screws are really, really stuck... any suggestion on now to loosen them up? I've been using PB Blaster with no luck Sad
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Online

It's not a backfire,
It's a belch of
POWER!

Posts: 24622
L.A. California
Gender: male
Re: Carburetor Specifications
Reply #19 - 10/07/17 at 16:32:52
 
marccarrion wrote on 10/07/17 at 16:14:58:
My four top screws are really, really stuck... any suggestion on now to loosen them up? I've been using PB Blaster with no luck Sad

After the blaster go to a pair of vice grips and grab the head.
they use lock tite every where.  you can use heat, but here you'd need to be real careful.
there are rubber bits not that far away and I wouldn't recommend it.
Back to top
 
 

WWW   IP Logged
marccarrion
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 19

Re: Carburetor Specifications
Reply #20 - 10/07/17 at 16:40:15
 
Could I use a vise instead of the vice grips? I think you may be right with the locktite, I may need to apply some heat too, but I don't have a heat gun Sad and I don't want to apply a flame (the only rubber parts are inside, right?)
Back to top
 
 
  IP Logged
marccarrion
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 19

Re: Carburetor Specifications
Reply #21 - 10/08/17 at 08:58:58
 
verslagen1 wrote on 10/07/17 at 16:32:52:
marccarrion wrote on 10/07/17 at 16:14:58:
My four top screws are really, really stuck... any suggestion on now to loosen them up? I've been using PB Blaster with no luck Sad

After the blaster go to a pair of vice grips and grab the head.
they use lock tite every where.  you can use heat, but here you'd need to be real careful.
there are rubber bits not that far away and I wouldn't recommend it.


duh... I thought you meant to hold the carb, but I see now, use the vice grips to loosen them, I went to get one and that worked great, THANKS!!!

I am cleaning all parts, getting new nuts and putting it all together again, THANKS!!!
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Online

It's not a backfire,
It's a belch of
POWER!

Posts: 24622
L.A. California
Gender: male
Re: Carburetor Specifications
Reply #22 - 10/19/17 at 15:54:32
 
Off topic replies have been moved to this thread.
Back to top
 
 

WWW   IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
12/16/17 at 12:27:07



General CategoryTechnical Documents/Reference › Carburetor Specifications


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.