SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> Need decomp controller & gas tank round rubber
/cgi-bin/YaBB.pl?num=1701785293

Message started by Kelly S. on 12/05/23 at 06:08:13

Title: Need decomp controller & gas tank round rubber
Post by Kelly S. on 12/05/23 at 06:08:13

Hey everyone! I'm looking for a decomp control (part #32910-24b) for a 2008 boulevard s40 at a reasonable price.

Could also use one of those round rubber things that help hold the gas tank.

Title: Re: Need decomp controller & gas tank round rubber
Post by Kelly S. on 12/05/23 at 08:35:28

Got the gas tank cushions. Don't need those anymore.

Title: Re: Need decomp controller & gas tank round rubber
Post by LANCER on 12/05/23 at 13:32:57

I have some decomp’s for cheap+ shipping.
Or you can just eliminate it from the bike if you wish. I removed my decomp and have had no problems starting my Savage. I have the newer 97mm Wiseco piston (flat top w/ dish) so there is plenty of compression (11:1) to overcome. I’ve had this mod for years as well and almost never need to use the valve lift lever…maybe used it 2 or 3 times in the years since.
My solution ?
I installed a short bolt in the lever and can simply push it with my thumb to lift the exhaust valves when I hit the start button. It takes a half second.

Title: Re: Need decomp controller & gas tank round rubber
Post by Kelly S. on 12/05/23 at 15:42:15

Thanks for the reply! Are there instructions anywhere, preferably with pictures, on how to do this mod? Not gonna lie...I didn't understand most of what you said. lol

Title: Re: Need decomp controller & gas tank round rubber
Post by LANCER on 12/05/23 at 18:50:13

I will see if I can post a pic of my cylinder head .

Title: Re: Need decomp controller & gas tank round rubber
Post by Kelly S. on 12/05/23 at 21:47:05

OK thank you!

Title: Re: Need decomp controller & gas tank round rubber
Post by Kelly S. on 12/11/23 at 14:41:18

Got both of these, just fyi!