SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> Re: BOLT ON BUDGET HEAD (SOLD) /cgi-bin/YaBB.pl?num=1675968517 Message started by Dave on 02/09/23 at 10:49:36 |
Title: Re: BOLT ON BUDGET HEAD (SOLD) Post by Dave on 02/09/23 at 10:49:36 This head has been cleaned up and made ready to bolt on. I took the head apart and cleaned off the grease and crud. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:50:59 I took the valves out and the old valve seals, then cleaned the valves and lapped in the valves....they look good. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:51:39 I installed new Viton valve seals. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:52:38 I installed a new seal for the decompression shaft and a new seal for the rocker arm. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:54:38 I installed the best pair of used rocker arms I have. The intake rocker is great - the exhaust rocker is a bit more worn but serviceable. (If you have a better exhaust rocker or want to install a new one that wouldn't be a bad idea). |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:57:22 The head is cleaned up and ready to install - and after looking at it for a few days I decided I needed to repaint the head cover. I took it apart, bead blasted it, and painted it with 500 degree engine enamel in a color that very closely matches the original color. You will have to supply the gaskets and all the hardware for this installation. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 10:59:11 The carbon is removed from the combustion chamber. The sealing surface looks good. |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 02/09/23 at 11:00:47 I also added a good Webcam 466 grind camshaft that is in good condition. After taking the photo I coated the cam lobes with camshaft assembly grease and placed a "dollop" of it in the well under the cam - so you can make sure the cam/rockers have a good supply of lube when you assemble it. I will ship this to any of the mainland 48 states for $400. If you want to upgrade to a new Webcam Stage 1 or Stage 3 camshaft, the price would be increased to $575. |
Title: Re: BOLT ON BUDGET HEAD - $350 Post by Dave on 02/23/23 at 08:49:24 Now that the head cover is painted.....it is far more presentable! |
Title: Re: BOLT ON BUDGET HEAD Post by Dave on 06/20/23 at 03:41:17 Sold |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |