SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> Looking for RYCA Exhaust Adapter
/cgi-bin/YaBB.pl?num=1670430307

Message started by SavageWife on 12/07/22 at 08:25:07

Title: Looking for RYCA Exhaust Adapter
Post by SavageWife on 12/07/22 at 08:25:07

Hello. I'm new to the forum. I recently picked up a 2012 S-40. I'm doing a Harley Dyna exhaust swap, but I'm having difficulty finding the RYCA 10 degree adapter. Can anybody help me find one or let me know if anyone is selling one?

Much Appreciated

Title: Re: Looking for RYCA Exhaust Adapter
Post by verslagen1 on 12/07/22 at 09:36:31

It's just a simple bent tube.
Go to a local muffler shop and get one made.

Title: Re: Looking for RYCA Exhaust Adapter
Post by SavageWife on 12/07/22 at 09:56:32

Thank you for the input. We did make our own on a trial basis. Our bend was pretty primitive and not very cosmetically pleasing. The RYCA has a nice finish, but I'm sure we could add a chrome cover to one bent by a muffler shop. Thank you again.

Title: Re: Looking for RYCA Exhaust Adapter
Post by Fast 650 on 12/07/22 at 11:30:10

You can do a very clean looking bend yourself by sawing most of the way through a piece of 1.75 inch exhaust tubing, squeezing the gap closed, and having someone weld (TIG weld is neater but MIG is fine too) the gap together. Duplicolor hi-temp aluminum spray paint with the ceramic will help hide the adapter if you can't find a chrome cover for it.

Title: Re: Looking for RYCA Exhaust Adapter
Post by SavageWife on 12/08/22 at 04:33:26

We can do that. Thank you for another option.