SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Extended swingarm
/cgi-bin/YaBB.pl?num=1628929374

Message started by grevenz on 08/14/21 at 01:22:54

Title: Extended swingarm
Post by grevenz on 08/14/21 at 01:22:54

Hi does anyone know where i can get a longer belt for my extended swingarm?
Its extended approx. 2,5 inches.

Title: Re: Extended swingarm
Post by Dave on 08/14/21 at 03:53:02

The belt on the Savage is made by Bando, and it is available from industrial suppliers in various lengths. You just need to find a supplier that will order what you want and sell it to you.

The Kawasaki EN500 also used a Bando belt, as did the KZ750. They are a bit different in lengths - but I don't know if either one of them was long enough to work with your swing arm.

https://www.bandousa.com/

Title: Re: Extended swingarm
Post by Ruttly on 08/14/21 at 12:16:01

A good bearing supplier may be able to help you. A bearing house also supplies seals , chain , drive belts and all kinds gear head goodies

Title: Re: Extended swingarm
Post by justin_o_guy2 on 08/14/21 at 14:52:23

If you discover you're screwed the next possible answer is a chain??
It's not just a snap, and then you have to deal with a chain, but it's very well researched and explained.

Title: Re: Extended swingarm
Post by Ruttly on 08/14/21 at 16:01:21

If you bought the prefabbed extensions , I would ask whoever made them.
I bet they would know.

Title: Re: Extended swingarm
Post by Ruttly on 08/14/21 at 16:41:21

Now I’m curious , I would like a longer swing arm so I could run 19” hoops. The trackers looks would be the only reason , well maybe some better flat track tires too ! So who did you buy them from ?

Title: Re: Extended swingarm
Post by ohiomoto on 08/14/21 at 19:01:55

Right on Ruttly! I like the way you think.