|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> BOLT ON CYLINDER HEAD /cgi-bin/YaBB.pl?num=1623503159 Message started by Dave on 06/12/21 at 06:05:57 |
|
Title: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:05:57 This head has been cleaned up and made ready to install. The head was taken apart and pressure washed - then the exhaust port was opened up in the DragBikeMike "D" shape to improve flow. The head and head cover mating surfaces were refinished to ensure a good seal. The valves were cleaned up and inspected, and new Viton seals were installed. The compression release shaft has a new seal installed. The cylinder head cover and rocker inspection caps was painted with ceramic engine paint. The rockers are welded and resurfaced by Webcam. $270 shipped to the mainland 48 states in a medium size Flat Rate Box. If you want a camshaft add $100 for a good stock cam - or $300 for one of Lancer's performance cams (no core charge in this sale - however if you have a good core please send it to Lancer). |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:07:56 Sealing surface, combustion chamber and valves. The dark spots are small carbon discolored areas - once your start riding it will all get a carbon coating! |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:09:18 Intake port |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:09:44 Exhaust port (D shaped). |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:10:51 Decompression lever area - the cable mount and screws are included but will not be attached, as it sticks up too far to fit in the shipping box. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:11:33 Valve area and cam bearings in head. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:12:07 Head cover |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:13:25 Head cover cam bearings and rockers. One rocker has been used about 6,000 miles, the other one has been welded/resurfaced by Webcam. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:14:10 New Viton valve seals. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 06/12/21 at 06:15:38 There is a crack in the bottom fin over the exhaust port.......no harm, no foul and it won't hurt a thing. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by LS650THUMPER on 06/15/21 at 19:28:53 wow, nice, glad I looked here, think i need one of these, I am interested , will let you know |
|
Title: Re: BOLT ON CYLINDER HEAD Post by LS650THUMPER on 06/19/21 at 20:54:34 is this still available , and regular cam |
|
Title: Re: BOLT ON CYLINDER HEAD Post by grandpa on 04/29/22 at 16:47:42 Is this still available? |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 05/01/22 at 11:41:42 7366757A706475140 wrote:
That one is gone - but I have another one that is ready to paint and then assemble. Do you want silver or black? I am not sure what rockers I have for this head.......I will have to check. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by grandpa on 05/01/22 at 14:47:21 I will take it. Black is preferred. My grandson's 2006 keeps leaking at the cam cover. I have had it off and on too many times. Last time a bolt broke when I tried to loosen it. Another one started stripping as soon as it got past finger tight. Needless to say it pumped oil everywhere. I can bring his old head and swap over rockers etc. I am about 7 hours away from you. Will be a nice road trip in my Miata! Just let me know and you can have his old head. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by grandpa on 05/19/22 at 14:45:01 What is the status? Might be going for a new engine instead. |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Dave on 05/20/22 at 03:34:29 I got swamped at work and home, and I just haven't been able to get it painted and assembled. I am currently up at my mom's house 300 miles away from home helping visiting with my cousin who was just moved into hospice and helping my sister try and get my mom's estate settle. As soon as I get back tomorrow we are leaving to visit my wife's family for the week. I may have enough time to get it painted tomorrow if the weather allows, and I will be able to get it done the following week and get it to you before the end of the month. Sometimes life just gets really busy and interrupts your other plans! At teh end of June I am retiring and I expect to be able to get a lot more of "my stuff" done! |
|
Title: Re: BOLT ON CYLINDER HEAD Post by TheSneeze on 05/20/22 at 14:12:45 (off topic) Congrats on the retirement, Dave! I am four years in and love it! |
|
Title: Re: BOLT ON CYLINDER HEAD Post by Ruttly on 05/21/22 at 21:49:55 You got the sickness too , it’s a sin to lie to yourself ! You actually meant to say “sometimes life gets in the way of the build”. It’s ok Dave you have one great support group. ;D |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |