SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> VM Carb Clearance Sale
/cgi-bin/YaBB.pl?num=1621437915

Message started by LANCER on 05/19/21 at 08:25:15

Title: VM Carb Clearance Sale
Post by LANCER on 05/19/21 at 08:25:15

i have 2 new 38mm VM carbs for $60 each, including shipping in the US.

They are #VM38-9
Box stock right now but Jets, rubber flanges, and throttle cables are available for Savage setup if desired.

Title: Re: Carbs
Post by LANCER on 06/02/21 at 10:11:55

Bump

Title: Re: VM Carb Sale
Post by LANCER on 06/28/21 at 12:07:59

bump

Title: Re: VM Carb Sale
Post by norman3516 on 07/09/21 at 13:45:49

do these carbs work ? the one on my bike i just got doesnt run very good , i rebuild it and now it idles right but its hard to start and mid to upper throttle is bad . the mixture screw cant turn in or out , the head on the screw has no slot for the screw driver so i dont know if its set right . the person before me mess it up and i didnt know when i brought the bike . a new s40 carb is 600 . tell me more about your carb please

Title: Re: VM Carb Sale
Post by LANCER on 07/10/21 at 08:09:32

70716C737F702D2B2F281E0 wrote:

Yes, the VM carbs work very well on our big singles. Before the factories started using the CV carbs the VM 34/36/38 were extensively used by the factories for big singles. Years ago I had a 1956 BSA Goldstar 500 flat track racing bike with a 38mm VM type carb and it ran like a Screaming Eagle and topped out at 110mph as geared for the 1 mile dirt oval tracks. It was VERY quick.
The VM is the most used performance carb for motorcycles in the world, and has been for over 50 years, and is still being produced today. It is inexpensive and it works.
I’ve been using mine for over 15 years. My bike fires right up without using the choke except on cold winter days. The VM is much more responsive and will add power. It is also easy to tune.

Title: Re: VM Carb Clearance Sale
Post by LANCER on 09/03/21 at 12:37:15

Bump

NEW LOWER PRICE

Title: Re: VM Carb Clearance Sale
Post by Temp1234567 on 09/07/21 at 12:04:05

Hey Lancer, I'm interested in getting one set up for the savage from you. This is my first post so I'm unable to send you a private message at the moment.

Thanks, Brett.

Title: Re: VM Carb Clearance Sale
Post by Fabricio Bino on 09/08/21 at 13:14:34

hey Lancer! How much for a vm36 with all the required jetset for a sea-level 680cc harley exaust savage? shipping to Brazil? I think my current throtle cabe is going to work as i currently have a vm38 with suspicious jetting

Title: Re: VM Carb Clearance Sale
Post by LANCER on 09/08/21 at 13:59:51

303734243F353F397830333A3F25343F3839560 wrote:

Without a throttle cable the kit is $329 + $80 shipping = $409