SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> li'l crack in the oil filter cover /cgi-bin/YaBB.pl?num=1617056403 Message started by Tocsik on 03/29/21 at 15:20:03 |
Title: li'l crack in the oil filter cover Post by Tocsik on 03/29/21 at 15:20:03 I was doing an oil change this weekend (23K) and found this small crack around the lower bolt hole of the oil filter cover. It seems fine as I don't see the crack on the inside and these motors are low pressure anyway. So I guess this is more of a fascinoma than a question. Bike hasn't been dropped and I'm always very careful when putting the filter, spring etc. back in b/c of the stories I read of some folks breaking the oil filter cover. Anyone else reusing both rubber O-rings for a reeeeeally long time? Mine have held up great! They sure last a heckuva lot longer than our brake pads :-/. |
Title: Re: li'l crack in the oil filter cover Post by DragBikeMike on 03/29/21 at 16:22:06 When I enlarge your picture the indication looks more like a cut than a crack. I can see the bottom of the defect. I don't think its a crack. It looks like something sharp scraped/gouged the cover. |
Title: Re: li'l crack in the oil filter cover Post by Tocsik on 03/29/21 at 19:02:58 I believe you are correct, DBM. I zoomed up the originals. Amazing how good the cameras on our phones are now. And sad how bad my eyes are getting! |
Title: Re: li'l crack in the oil filter cover Post by justin_o_guy2 on 03/29/21 at 20:27:38 I'm not Saying it's aliens But It's ALIENS!!!! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |