SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Wiring Relocation & Fake oil Cylinder /cgi-bin/YaBB.pl?num=1611332749 Message started by YeetandGreet on 01/22/21 at 08:25:49 |
Title: Wiring Relocation & Fake oil Cylinder Post by YeetandGreet on 01/22/21 at 08:25:49 Good Morning to some of us on the east coast, this week I finally had the time to somewhat relocate the computer, Grid Thing(always forget the name), and hide most of my wires. I bought a fake oil cylinder from "TC bros Fabricators" to try and mock up a place as to where to hide the wires. Cylinder ran me about $80 side note: I happened to see a savage with the same cylinder on their page, therefore decided to give it a try |
Title: Re: Wiring Relocation & Brake Caliper issue Post by YeetandGreet on 01/22/21 at 08:38:57 there's a couple of posts-reply I have to re-do since the pictures were too big for Upload please bear with me I'm new to figuring things out on forums |
Title: Re: Wiring Relocation & Brake Caliper issue Post by YeetandGreet on 01/22/21 at 17:35:09 Here is a mock-up of the cylinder, as you can see there's too much width, which interferes with the belt drive. however, since the photo I've taken, I cut 3/4 of the total length of the side that's closest to the belt and shortened both of the end caps which the cylinder brings. http://https://www.bikepics.com/pics/2021/01/23/bikepics-2821218-984.jpg Also, there is about half an inch to an inch of length/rise left on the bolts which i need to buy another spacer to lift it ill post another picture with the rest of the rise and the cylinder cut tomorrow |
Title: Re: Wiring Relocation & Brake Caliper issue Post by YeetandGreet on 01/22/21 at 17:36:47 cylinder sadly doesn't line up to the rear fender mount so welding is required, and you need to take off the side cover mounts. |
Title: Re: Wiring Relocation & Fake oil Cylinder Post by YeetandGreet on 01/22/21 at 18:03:18 Also I'm in the middle of Doing a Chain conversion which would allow me a bit more clearance |
Title: Re: Wiring Relocation & Fake oil Cylinder Post by YeetandGreet on 01/22/21 at 18:06:39 ;DAlso wanted to ask, that there used to be a post about relocating the battery to the muffler bracket/Emission Canister bracket. but I can't find one for the life of me, I think I saw one a couple of months ago but it had no Images for reference |
Title: Re: Wiring Relocation & Fake oil Cylinder Post by verslagen1 on 01/22/21 at 18:34:59 I don't know how you could of missed it, second post in the tech section. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1259644714 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |