SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Speedo Cable... Broken? /cgi-bin/YaBB.pl?num=1605792173 Message started by RedWing on 11/19/20 at 05:22:53

Title: Speedo Cable... Broken? Post by RedWing on 11/19/20 at 05:22:53 hi folks, I am starting the process of changing the Head Plug this morning. When I unscrewed the speedometer cable from the engine and removed the sheathing there is still about a 2” piece of cable sticking out from the engine. Not normal, right? I can’t pull this piece out to save my butt! The Speedo doesn’t work, and I assume this is the problem..... but how do I get it out?? I have even had pliers on it. It just won’t come out.....help!

Title: Re: Speedo Cable... Broken? Post by Gary_in_NJ on 11/19/20 at 06:07:10 Soak it with penetrating oil (not wd40). When trying to remove it after soaking, don't just pull on the remaining cable, push, than pull - you need to break the corrosive bond. When cables are properly lubed, this doesn't happen.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.