SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> Wiseco pistons: 97’s here...94’s on the way /cgi-bin/YaBB.pl?num=1603308664 Message started by LANCER on 10/21/20 at 12:31:04 |
Title: Wiseco pistons: 97’s here...94’s on the way Post by LANCER on 10/21/20 at 12:31:04 I have a new piston made by Wiseco and designed specifically for the LS650 engine. Based upon data developed by Dragbikemike, I had Wiseco design this piston in the stock 94mm size, close to the same weight as a stock piston, and with a “flat top with dish” to gain a true 10.5:1 compression ratio. The initial order was small and only 2 are available at this time. More can be ordered if there is interest but a 4-6 week order-to-receipt is to be expected. Price remains the same as before, $199 shp. incl. for US Will post some more info/photos later. ******************* Working on photos. Just rechecked the 94mm piston/pin/clip weights: Stock............477g Old Wiseco.....475g New Wiseco....491 |
Title: Re: New Wiseco piston Post by Jdvt600 on 10/21/20 at 19:48:12 Very nice! I will try to get in on a future order. |
Title: Re: New Wiseco piston Post by Armen on 10/22/20 at 06:48:33 Paypal ok? thanks |
Title: Re: New Wiseco piston Post by LANCER on 10/22/20 at 08:39:21 5B68777F741A0 wrote:
I prefer a regular check if at all possible. PM me for mailing info. |
Title: Re: New Wiseco piston Post by LANCER on 01/18/21 at 11:28:23 It’s time to order more of the new Wiseco 94mm 10.5:1 CR pistons if there are folks interested. They are a custom made so I have to order at least 4/order. So if you are going to want one in the next 4-6 months let me know now so I can get them in one batch. It may be many months before more can be gotten. |
Title: Re: New Wiseco piston Post by Armen on 01/18/21 at 12:20:48 Should we mail a check or do PayPal? thanks |
Title: Re: New Wiseco piston Post by LANCER on 01/19/21 at 04:08:04 Actually, I prefer a regular check, saves a few $ and time wise works about as well too. PM me for mailing info. Of course if anyone needs to use a card PayPal is still good. Use “Savage.s40@gmail.com” |
Title: Re: New Wiseco piston order *** DUE SOON Post by LANCER on 03/15/21 at 08:50:21 The latest piston order is due out of production at the end of this month; I have 6 of the 94's and 4 of the 97mm pistons ordered. I am taking preorders now for those interested. Cash, check, MO, CC & Paypal. Payment now holds a piston for you. |
Title: Re: New Wiseco piston Post by LANCER on 04/30/21 at 04:34:49 I have both 94 & 97mm sizes of the new Wiseco pistons in stock. (10.5:1 CR) $199 each Also available are 2 of the older style Wiseco pistons for just $125 each. (9.5:1 CR) |
Title: Re: New Wiseco piston Post by grevenz on 07/02/21 at 04:49:15 Hi i want one of those pistons,Will you ship to denmark? 8-) |
Title: Re: New Wiseco piston Post by LANCER on 07/02/21 at 05:51:27 77627566757E6A100 wrote:
Of course, your just across a bit of water ! I will need to add additional shipping charges though. I’ll check and get back to you. Can you PM me or email ? |
Title: Re: New Wiseco piston Post by grevenz on 07/02/21 at 06:02:59 My email seems not to be working with the link..Can you give me the adress in a pm |
Title: Re: New Wiseco piston Post by LANCER on 07/03/21 at 15:55:51 5E4B5C4F5C5743390 wrote:
Your piston is on the way. You should have received tracking info from PayPal. Let me know if you did not. |
Title: Re: New Wiseco piston Post by Orlando A. on 08/18/21 at 11:04:03 Do you have any 95mm in stock? |
Title: Re: New Wiseco piston Post by Murphdawg on 08/18/21 at 15:09:19 How much of a difference do you actually feel between old wiseco and new wiseco (both 94mm)? I’d like to grab a new one but that discounted $125 old one is more in my price range… Orr should I get a stage 2/3 camshaft instead ? I’ve got the bike breathing a heck of a lot better and a flat slide carb as far as performance mods go. |
Title: Re: New Wiseco piston Post by DragBikeMike on 08/18/21 at 16:38:28 Murphdawg, read this old post. It's a full performance test on the Wiseco flat-top piston. If you buy a flat-top, make sure you do clay checks to verify adequate piston-to-valve clearance. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1613022271/0 Good luck, Mike |
Title: Re: New Wiseco piston Post by LANCER on 08/27/21 at 11:36:08 I am suspending sale of the 97mm piston until we can work out the clearance issue on them. |
Title: Re: New Wiseco piston Post by LANCER on 11/19/21 at 04:58:16 The 97mm pistons should be available in a few weeks |
Title: Re: New Wiseco piston Post by Armen on 11/19/21 at 05:17:29 Did you change the valve cutaway? |
Title: Re: New Wiseco piston Post by LANCER on 11/19/21 at 07:46:30 4B78676F640A0 wrote:
Yes, the valve cutaways have been changed by Wiseco. |
Title: Re: New Wiseco piston Post by LANCER on 01/06/22 at 08:46:16 The revised 97mm pistons have an ETA of Tuesday 1-11-22. The 94mm pistons MAY ship next week...hopefully. |
Title: Re: 97mm Wiseco pistons are here Post by LANCER on 01/11/22 at 15:13:10 I have received the 97mm pistons and will begin to ship tomorrow. |
Title: Re: Wiseco pistons: 97’s here...94’s on the way Post by LANCER on 01/20/22 at 13:02:11 Wiseco called today and the 94mm pistons are on the way, expecting them in a week. |
Title: Re: Wiseco pistons: 97’s here...94’s on the way Post by TheSneeze on 01/22/22 at 11:11:32 YAY!!! |
Title: Re: Wiseco pistons: 97’s here...94’s on the way Post by Dave on 01/25/22 at 04:34:49 I got my new 97.......looks great! Thanks Lancer! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |