SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> CLEARANCE PARTS SALE
/cgi-bin/YaBB.pl?num=1602088688

Message started by LANCER on 10/07/20 at 09:38:08

Title: CLEARANCE PARTS SALE
Post by LANCER on 10/07/20 at 09:38:08

(New unless noted otherwise)

-2 Rubber flanges for 34mm VM or similar carb, mount holes are about 3-4 mm wider spaced than ours but that can be easily adjusted to use on the Savage.
$15 each, shp incl. in US

-2 Quad flow Torque Wings for 38mm VM 's
$50 each, shp incl in US

-UFO's: 1 for a 34mm VM $25 incl.shp.
1 36mm for VM carb $25

-Used cam & gear set from a DR 350-450, nice condition
Free, just pay shipping

-2 Wiseco piston 94mm (9.5:1 CR) $100 ea. Incl. shp. (9.5:1 CR)

email to savage.s40@gmail.com if you need photos of something

Title: Re: Its a "Good Riding Weather" SALE
Post by LANCER on 03/15/21 at 13:19:19

BUT WAIT ... THERE'S MORE ! ! !

-4.5 gal bubble tank, black
needs inside cleaning and sealing
$50 + shp

Title: Re: PARTS SALE
Post by SoC on 03/18/21 at 12:40:34

Lancer, what's the deal with the Dial-a-Jets. Do you, or have you used them. I am curious about them as there are a lot of threads about rejetting at altitude and such. I am at sea level, live on the Jersey shore and wonder about riding into the mountains in Vermont, New Hampshire and NY State. For example was thinking about a ride to Mt. Washington this summer. Wondering if it would be helpful for that. They are not high, like Rockies, but several thousand feet up in elevation from where I normally ride.

Title: Re: PARTS SALE
Post by LANCER on 03/19/21 at 03:05:50

Good morning

I have used the Dial-a-jets for years.
On the current carb I have on my bike I was getting 50-52mpg and after adding the DAJ that jumped up to 62mpg. Along with that overall performance improved from mid-wide open throttle. Additionally it can be adjusted easily when in the hills/mountains. It does work. I use it.

Title: Re: PARTS SALE
Post by LANCER on 06/28/21 at 10:57:25

TNew items added:

cam gears with pins and lock plate ... FREE, just pay postage

starter $75

Title: Re: CLEARANCE PARTS SALE
Post by LANCER on 09/03/21 at 12:58:14

Bump clearance sale

Title: Re: CLEARANCE PARTS SALE
Post by LANCER on 11/19/21 at 04:54:39

Bump

Title: Re: CLEARANCE PARTS SALE
Post by NMSavage on 11/19/21 at 09:54:39

Morning Lancer,

I saw your bump.

If you still have the muffler available, I'd be happy to take it off your hands.

My shipping address is: Eldon Ayers
5050 Vista Chico Loop
Las Cruces NM 88012

Please shoot me a total and I'll get you paid via PayPal ASAP or use whatever means you perfer.

Good to do business with you again. BTW, the shocks you sent me are positively great, look good, and ride just right. I'm in you debt.

Eldon/*

Title: Re: CLEARANCE PARTS SALE
Post by LANCER on 11/20/21 at 04:05:33

537A727978576F736465160 wrote:

* 537A727978576F736465160

The muffler has an extended heat shield welded to it, do you want that that attached or cut off ? I can email you photos if you want to see first.