SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Rearsets
/cgi-bin/YaBB.pl?num=1601159504

Message started by gtenginerd on 09/26/20 at 15:31:44

Title: Rearsets
Post by gtenginerd on 09/26/20 at 15:31:44

I saw a few threads on moving rearsets, but nothing totally complete. Anyone have guidance on the best way to move the rearsets since RYCA isn't selling parts anymore?

This is the latest and greatest thread I can find:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1487785879/30

Title: Re: Rearsets
Post by gtenginerd on 09/29/20 at 18:02:18

Figured since there were no replies I was being a dummy...I was right. I didn't realize the link I was accessing started on the 3rd page of this thread, so I missed the first two of the build.

Seems to be fairly simple, but I haven't done much welding. Any insight for someone trying to tackle this?

Title: Re: Rearsets
Post by justin_o_guy2 on 09/29/20 at 18:53:04

Not ignoring you..
I don't have a clue..

Title: Re: Rearsets
Post by ohiomoto on 09/30/20 at 15:01:13

Since I was the main contributor to that thread, I will chime in. Go there and look at the second post. That's the basic example of a simple rearset bracket.

The ones I made are very similar to what Ryca made except I made them in two pieces and I made them to accept mid-control. Simply modify the side plate as needed to locate and accept the rearsets.

And since your life depends on this, cut the pieces as need and have a pro do the welding.