SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Handlebar Questions
/cgi-bin/YaBB.pl?num=1597884463

Message started by Ando on 08/19/20 at 17:47:43

Title: Handlebar Questions
Post by Ando on 08/19/20 at 17:47:43

Hi. Looking at some new bar options as my 96 came with some 9" high bars with only about a 3" pullback, sorta like high drag bars. no more stock risers :(

my three questions:

do we need dimpled, drilled or neither on our bars (my guess is neither)

does anyone have some part numbers for the stock 1" risers and clamps to see if i can get some OEMs

any 1" bar ends and grips should fit yeah?

planning to throw on some 10" apes like this

https://www.jpcycles.com/product/500-839/j-p-cycles-1-chrome-10-ape-hanger-handlebar

Title: Re: Handlebar Questions
Post by ohiomoto on 08/19/20 at 17:54:32

Neither unless you want to hide wires.

https://www.partzilla.com/catalog/suzuki/motorcycle/1996/savage-ls650p/steering-stem
(You might need to source aftermarket risers and use the stock rubbers.)

Yes, 1" grips.

Title: Re: Handlebar Questions
Post by Ando on 08/19/20 at 18:04:28

looks like item 7-16 x2 for the risers?

Title: Re: Handlebar Questions
Post by norm92de on 08/19/20 at 19:32:35

You should be able to find some stock risers since a lot of people have removed them.

I filed the dimples off my switches so as to move them around.